- Posts: 45
- Thank you received: 2
Cummins C 160 parts
7 years 9 months ago #171454
by teggun
Cummins C 160 parts was created by teggun
Hi,
I am after some parts for a Cummins C 160 we are rebuilding. A couple of years ago I think NEWTO had rebuild kits.
Just wondering if NEWTO is still around and still has them or if someone knows how to get in contact with him or if there are any other suggestions on where I may be able to get a rebuild kit from.
Many thanks,
Cheers
Graeme
I am after some parts for a Cummins C 160 we are rebuilding. A couple of years ago I think NEWTO had rebuild kits.
Just wondering if NEWTO is still around and still has them or if someone knows how to get in contact with him or if there are any other suggestions on where I may be able to get a rebuild kit from.
Many thanks,
Cheers
Graeme
Please Log in to join the conversation.
7 years 9 months ago #171456
by IHScout
Dennis
Replied by IHScout on topic Cummins C 160 parts
Graeme, Newto hasn't been on the forum since the upgrade last year (not under that username anyway). If you search the forum with "Cummins" as the subject and "Newto" as in the user and select "all posts", I'm pretty sure you'll find an email address for him.
Dennis
Please Log in to join the conversation.
7 years 9 months ago #171457
by hayseed
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Replied by hayseed on topic Cummins C 160 parts
Try here, teggun.....
online.newtonsdiesel.com.au/secure.htm
Forum member Gilly also had an extensive collection of C160/180 parts at one stage he may be worth a PM.
Forum member Gilly also had an extensive collection of C160/180 parts at one stage he may be worth a PM.
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Please Log in to join the conversation.
7 years 9 months ago #171476
by teggun
Replied by teggun on topic Cummins C 160 parts
Hi Guys,
Thanks for the info, I don't suppose anyone has a contact for Gilly, if you could PM it to me, it would be greatly appreciated.
Many thanks,
Cheers
Graeme
Thanks for the info, I don't suppose anyone has a contact for Gilly, if you could PM it to me, it would be greatly appreciated.
Many thanks,
Cheers
Graeme
Please Log in to join the conversation.
7 years 9 months ago - 7 years 9 months ago #171477
by Sarge
Sarge
ACCO Owner, Atkinson dreamer.
Replied by Sarge on topic Cummins C 160 parts
Just search for Gilly in the search link, it will show you some of his recent posts, under his name in the post is a talk bubble or little cloud, that is the link to his email...
or go to channel 40 in the top of this page menu, and type Gilly into the "to" box or select Gilly from the drop down menu... either way you get to send him a PM (private message/email)
or go to channel 40 in the top of this page menu, and type Gilly into the "to" box or select Gilly from the drop down menu... either way you get to send him a PM (private message/email)
Sarge
ACCO Owner, Atkinson dreamer.
Last edit: 7 years 9 months ago by Sarge.
Please Log in to join the conversation.
7 years 9 months ago #171573
by gilly
Replied by gilly on topic Cummins C 160 parts
Hi,
Logged on to post a question about a Cummins 160.
I sold most of my stock I had, only have a cyl head & a few odds & ends, water pumps for a 160, & a 180.
Have an ol mate in Tassie looking for a liner for his 160, pulled her down to investigate water usage, found one liner not serviceable. I have a set of liner o rings for him, just need the liner, even a good s/h one should hone up ok.
Gilly
Logged on to post a question about a Cummins 160.
I sold most of my stock I had, only have a cyl head & a few odds & ends, water pumps for a 160, & a 180.
Have an ol mate in Tassie looking for a liner for his 160, pulled her down to investigate water usage, found one liner not serviceable. I have a set of liner o rings for him, just need the liner, even a good s/h one should hone up ok.
Gilly
Please Log in to join the conversation.
7 years 9 months ago #171593
by gilly
Replied by gilly on topic Cummins C 160 parts
Ol Newto heard the call, responded to advise he has a couple of liners left, sadly he advises gasket sets have all but no longer available, genuine rings are no go, do know of a place in Adelaide that can make rings if desperate, so sadly, the future of spares is grim.
Newto will shudder with this comment, that is why I become a Detroit man, everything is still available for the 53.
GG
Newto will shudder with this comment, that is why I become a Detroit man, everything is still available for the 53.
GG
Please Log in to join the conversation.
7 years 9 months ago #171594
by Swishy
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Replied by Swishy on topic Cummins C 160 parts
Gilly
Gudday M8
RE: I become a Detroit man
U B a wize man
Detroit parts stihl available @ Most Cnr Shops
The Bute eee ful Muzac the Detroits produce means
U gotta beat off the Chikie Babes wiff a big stik
LOL
cya
Gudday M8
RE: I become a Detroit man
U B a wize man
Detroit parts stihl available @ Most Cnr Shops
The Bute eee ful Muzac the Detroits produce means
U gotta beat off the Chikie Babes wiff a big stik
LOL
cya
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Please Log in to join the conversation.
- Chocs
7 years 9 months ago #171616
by Chocs
Replied by Chocs on topic Cummins C 160 parts
If you look up Newton's Diesel Service
In Penrith N.S.W.
www.newtonsdiesel.com.au
All the contact details are there..
chocs
In Penrith N.S.W.
www.newtonsdiesel.com.au
All the contact details are there..
chocs
Please Log in to join the conversation.
Time to create page: 0.503 seconds