- Posts: 195
- Thank you received: 74
Bedford wheel needed
The rim was damaged and cannot be used so I am now running with my spare only and am on my way from Newcastle to Canberra. I am hoping to pick up another rim somewhere on the way.
I am looking for an 8 stud 20 inch steel wheel to suit a Bedford. Any leads appreciated.
Please Log in to join the conversation.
Please Log in to join the conversation.
Gudday M8
the steers can B a life n death situation
run your best on the steers
if one front rim gave way
wot about the other
Wot condition will th@ B in?
n dun 4 get
we here for a good time
n not along time
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Please Log in to join the conversation.
All tyres were new less than 10,000 ago and have plenty of tread. I have pulled the other steer tyre off and checked the wheel and it appears to be good.
A mate has lent me another as a spare to get down to Canberra and back but am still looking for another wheel.
Please Log in to join the conversation.
Sarge
ACCO Owner, Atkinson dreamer.
Please Log in to join the conversation.
Please Log in to join the conversation.
mikeg wrote: The jap 8 stud will fit but there is a difference in the taper on the nut, I am looking into this possibility now.
All tyres were new less than 10,000 ago and have plenty of tread. I have pulled the other steer tyre off and checked the wheel and it appears to be good.
A mate has lent me another as a spare to get down to Canberra and back but am still looking for another wheel.
Hi Mikeg .. As a short term fix re your Jap wheel taper, the wheel nuts could be machined that slight amount to accept the rim taper by anyone with a small lathe handy to you. Pretty sure that would get you on your way.
Please Log in to join the conversation.
Please Log in to join the conversation.
Jap 8 stud would to too big in the holes for pommy nuts.
Please Log in to join the conversation.