Searching for a specific post.

Hi Guys, I am looking for a specific post that Swishy put up for me earlier this year. Around February I think. It was regarding Kenworth manual steering box repair & adjustment. I have tried to put in the heading Kenworth Steering but all I keep getting is Grey Ghost stories. I'm doing something wrong but I'm not sure what. Cheers Tim

It's all ok folks, I found it on page 9 after searching each page. Cheers Tim

TiM
M80

Terry also put m here .... under Collection

www.hcvc.com.au/kenworth/159-kenworth-steering-manual

cya

Hi Swishy, thanks for the heads up. I pulled the box apart today & cleaned all the crud out of the bottom, refitted the hour glass worm gear & set the preload. Then lubed the sector shaft & then refitted that & got it set on the centre of the worm & set the preload on that ok. Tomorrow will be clean the outside with thinners & hit it with some fresh paint & refit it. The Garrison ram is with Hydro steer in Laverton (Club sponsors) & will hopefully be ready for pickup on Friday. Cheers & thanks for your assistance. Tim

TiM
Gudday M8


Wen setn the gears B aware th@ most wear on the gears is dun wen the steer n iz in the straight ahead position
just make sure on full lock the gear duz'nt bind up

spose U kno all th@ U ol Spanner bender U

:lol: :lol:

Cya