Skip to main content

Want to know

More
12 years 9 months ago #120114 by Mairjimmy
Want to know was created by Mairjimmy
I have these two rims in the shed and would like to know what they might be off, :-? :-? :-? :-/ :-/ :-/

[img


[img

No good sitting in my shed if some one needs them
Time to get up andd get going.......todays bad decisions aren't going to make themselves!!!

Please Log in to join the conversation.

More
12 years 9 months ago #120115 by wouldyou
Replied by wouldyou on topic Re: Want to know
From shaky memory our '36 Bedford ute had 5 stud wire wheels with the hub cap screwed on, they were 17 inch. David.

Please Log in to join the conversation.

More
12 years 9 months ago #120116 by Mairjimmy
Replied by Mairjimmy on topic Re: Want to know
The size of rim is 16'' ,the tyre on the one 6-70-16
Time to get up andd get going.......todays bad decisions aren't going to make themselves!!!

Please Log in to join the conversation.

More
12 years 9 months ago #120117 by RocksnRoses
Replied by RocksnRoses on topic Re: Want to know
Mairjimmy, I reckon those wheels could be off a 1936 Chevrolet Coupe, we had one here years ago and it had the same looking wire wheels on it.

RnR.

Please Log in to join the conversation.

More
12 years 9 months ago #120118 by Mairjimmy
Replied by Mairjimmy on topic Re: Want to know
RnR,
I had googled Chevs late 30s early 40s ,the wheels were on some models in 19'' and 17'' but I couldn't find 16''
Colin
Time to get up andd get going.......todays bad decisions aren't going to make themselves!!!

Please Log in to join the conversation.

More
12 years 9 months ago #120119 by RocksnRoses
Replied by RocksnRoses on topic Re: Want to know
You are right, Mairjimmy, I found one set of 16" on Google, but they were 6 stud.

It's that long ago, I can't remember what size ours were, but more than likely they were one of the larger sizes.

RnR.

Please Log in to join the conversation.

Time to create page: 0.253 seconds