Skip to main content

international brake booster

More
10 years 7 months ago #124070 by v8 inter nut
has anyone ever done up one of these air over hydraulic brake boosters on the side of an c1800??? the last one i sent away cost me $1300 and since i have 3 to do im not paying that for them... i rang my brake supplier today and he is finding out about an overhaul kit, cant be to hard just some seals gaskets and o rings mabye :-? :-? :-/

[IMG

Please Log in to join the conversation.

More
10 years 7 months ago #124071 by Chocs
That may not be what you think it is 'Nut...
Ya better talk to the chocs...


chocs 8-)

Please Log in to join the conversation.

More
10 years 7 months ago #124072 by hayseed
I'd be interested in this as well,
As I have the same setup on my old yard Prime mover.
If I can get a couple of "work" projects out of the way :-/

It's going to be My next 'play' project..

"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -

Please Log in to join the conversation.

More
10 years 7 months ago #124073 by AUSSIE TD-40
its a AIR-PACK
yep I would like a kit aswell
and how to do one would help aswell, have some info on them

jake

INTER TRUCKS, B-3, L-120, AL160, AACO180D, R-190, RD-200
plus a few Inter tractors eta
WARWICK QLD AUSTRALIA

Please Log in to join the conversation.

More
10 years 7 months ago #124074 by gilly
My Old C was leaking air from the booster when the brakes where applied, drain the tank in a mater of minutes, & the compressor on the old girl is pretty quick, unlike the Dodge one.
I had a spare that looked somewhat beyond repair, local brake shop ferried it off to melb for a complete rebuild--- just short of $800.
Old Murray at violet town advised me that he had attempted to short circuit the original one by fitting one of an Isuzu, long story short- all the stuffing around proved that the conversion just didn't work properly, for some reason, the jap one appeared not to have enough capacity.
When the reco one turned up, swapping them over, bleeding the system etc went without any stress, & the anchors are now pretty good for hydraulic. :-/
I can find out who repaired mine in Melb if that is any help.
GG

Please Log in to join the conversation.

More
10 years 6 months ago #124075 by wedgetail84
I'd be interested as well, mine works OK but I'm interested in a slow rebuild while she's still going...

Please Log in to join the conversation.

More
10 years 6 months ago #124076 by v8 inter nut
I have sent it away to power brakes south australia they tel me it shouldn't cost more then 700 I will let you know

Please Log in to join the conversation.

More
10 years 6 months ago #124077 by v8 inter nut
Complete overhaul including resleaves and post for $730 and only had it for 3 days! Very happy and highly recommended

Please Log in to join the conversation.

More
3 years 4 months ago - 3 years 4 months ago #216119 by Rattail 1927
Hi I had Murray’s phone number and my phone died and I haven’t heard of his name brought up since , I bought a shattered load of stuff and need some lovely vacuum stuff , Send pm if possible, thanks in advance jim
Last edit: 3 years 4 months ago by Rattail 1927.

Please Log in to join the conversation.

More
3 years 4 months ago #216229 by geoffb
Replied by geoffb on topic international brake booster
Try North Melbourne Clutch and Brake (Neil ) has helped me with some projects

Please Log in to join the conversation.

Time to create page: 0.446 seconds