- Posts: 20
- Thank you received: 1
where do I get the exhaust manifold gaskets?
10 years 8 months ago #146750
by Coupeute
AL110 inter ute &&FC Holden Wagon&&HJ Holden 1 Tonner&&
Replied by Coupeute on topic Re: where do I get the exhaust manifold gaskets?
Look up Autosurplus in Vic. I bought my 6 cyl gasket off them.
AL110 inter ute &&FC Holden Wagon&&HJ Holden 1 Tonner&&
Please Log in to join the conversation.
Less
More
- Posts: 33
- Thank you received: 0
10 years 8 months ago #146751
by grumpy growler
Replied by grumpy growler on topic Re: where do I get the exhaust manifold gaskets?
hi i purchased some gasket paper from bursons and cut my own it was quicker as i needed them straight away it only cost about $25 i cut 2 and ive got enough left to cut a spare just make sure u get the right stuff for exausts cheers pete
Please Log in to join the conversation.
10 years 8 months ago #146752
by Ely
Replied by Ely on topic Re: where do I get the exhaust manifold gaskets?
thanks for the help
Please Log in to join the conversation.
10 years 8 months ago #146753
by indianman
Replied by indianman on topic Re: where do I get the exhaust manifold gaskets?
G'day get onto Dodge Fred here on the forum I think he has a few in stock
Jon
Jon
Please Log in to join the conversation.
10 years 8 months ago #146754
by Ely
Replied by Ely on topic Re: where do I get the exhaust manifold gaskets?
all good...Derrinallum garage has them in stock...10km away
Please Log in to join the conversation.
Less
More
- Posts: 57
- Thank you received: 0
10 years 8 months ago #146755
by Battleduck
Replied by Battleduck on topic Re: where do I get the exhaust manifold gaskets?
I got a set new from IVECO Dandenong via Whitehorse Truck Parts. Not too expensive, either. About $45 for the pair off the top of my head. This was 2 years ago. Go to someone who knows Inters. Went to a "truck parts" shop and they wanted chassis number, engine numbers then looked at me blank. Went to Whitehorse, he got his tried and true book out, looked it up, rang the factory and got them in. Don't know why that was so hard at the other joint.
Please Log in to join the conversation.
Time to create page: 0.247 seconds