Skip to main content

Chasing D5n door locks

More
6 years 2 months ago #191399 by Hemi74
Replied by Hemi74 on topic Chasing D5n door locks
Yea unfortunately this old girl gotta go for a road worthy ! Had a look at the bonnet rubbers and yea not much in em just flat bits rubber, picked up a 245 clutch cover this morning , will see if it will marry onto the 318 , looking at retractable seat belts , anyone know what ones fit , the buckle stalks have to be fairly long to reach the ol benchy

Please Log in to join the conversation.

More
6 years 1 month ago #191404 by Lang
Replied by Lang on topic Chasing D5n door locks
No eBay APP ID and/or Cert ID defined in Kunena configurationEbay is your friend.



lang

Please Log in to join the conversation.

More
6 years 1 month ago - 6 years 1 month ago #191533 by oldgmc
Replied by oldgmc on topic Chasing D5n door locks
Try Fleetparts in Toowoomba they do the cab rubber kits and lot of other stuff for your seatbelts try Hemco in Ballarat

Old trucks will make you poor but not unhappy
Last edit: 6 years 1 month ago by oldgmc.

Please Log in to join the conversation.

More
6 years 1 month ago #191541 by Blackduck59
Replied by Blackduck59 on topic Chasing D5n door locks
Just be a little careful with EBay belts, make sure they have the Australian certification tags on them.
I used APV for the belts in the F350 and passed inspection without a hitch.
Cheers Steve

Please Log in to join the conversation.

More
6 years 1 month ago #191554 by 600Dodge
Replied by 600Dodge on topic Chasing D5n door locks
Those ebay ones are still to short, I bought them for my F350 but they barely put the receptacle at seat height, I ended up extending mine with some large chain covered in two layers of glue infused heat shrink so they stand up, I hope it never needs an inspection so thorough that they look behind the seat.

Please Log in to join the conversation.

More
5 years 8 months ago #195154 by AB120
Replied by AB120 on topic Chasing D5n door locks
fleetparts in Toowoomba have the bonnet rubbers to fit brand new

Please Log in to join the conversation.

Time to create page: 0.442 seconds