Updated 28th July.

If you are unable to login, you probably need to read this change to your username & profile.

 

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Hydraulic Pump Wanted

Hydraulic Pump Wanted 02 Aug 2020 17:41 #213286

  • Lang
  • Lang's Avatar Topic Author
  • Offline
  • Posts: 4135
  • Thank you received: 2159
I need an hydraulic pump to suit the PTO on my Mack Midliner to drive the new crane.





I think it looks like this
Attachments:
The following user(s) said Thank You: PaulFH

Please Log in to join the conversation.

Last edit: by Lang.

Hydraulic Pump Wanted 02 Aug 2020 22:47 #213299

  • cobbadog
  • cobbadog's Avatar
  • Offline
  • Posts: 1260
  • Thank you received: 556
Would the numbers be metric rather than imperial?
Cheers Cobba & Cobbarette
Coopernook, The Centre of our Universe.
COP-U-LATOR

Please Log in to join the conversation.

Hydraulic Pump Wanted 03 Aug 2020 08:21 #213303

  • JOHN.K.
  • JOHN.K.'s Avatar
  • Offline
  • Posts: 1674
  • Thank you received: 355
Type of crane will determine pump spec.....a Palfinger PK8000,or maybe a 10500 ,will need 6,000 psi ......both of these were great cranes ,quite light ,and can lift and stow 4 ton compressor ,the 8000 needed a bit if care,but the 10500,could do it easily,and could also handle a 20 ft container.from tray to ground & back.

Please Log in to join the conversation.

  • Page:
  • 1
Time to create page: 0.298 seconds

Historic Commercial Vehicles Club of Australia Inc.  Post: P.O. Box 2020 Bayswater Vic. 3153    Clubrooms: Unit 8 / 4  Macquarie Place Boronia    Club Phone: 0400 025 525    Club Rooms:  03) 9738 1558