- Posts: 52
- Thank you received: 0
Tipper hoist controller
- Inta ACCOs
- Topic Author
- Offline
Less
More
14 years 1 month ago #42845
by Inta ACCOs
Tipper hoist controller was created by Inta ACCOs
Hi guys,
My tipper hoist controller on the ACOO is starting to leak a lot of air, I've been told that they are not servicable and it simply needs to be replaced, see attached photo. No doubt it's as old as the truck itself (32 years).
All the hose connections are tight and leak is from the unit itself.
How much should I be paying for replacement and if anyone from WA can give me some tips, please let me know where I can start looking to buy one??
Cheers,
Joe
My tipper hoist controller on the ACOO is starting to leak a lot of air, I've been told that they are not servicable and it simply needs to be replaced, see attached photo. No doubt it's as old as the truck itself (32 years).
All the hose connections are tight and leak is from the unit itself.
How much should I be paying for replacement and if anyone from WA can give me some tips, please let me know where I can start looking to buy one??
Cheers,
Joe
Please Log in to join the conversation.
14 years 1 month ago #42846
by bigcam
Replied by bigcam on topic Re: Tipper hoist controller
About $200-$250. Check to see if it's using 6mm or 1/4" airline. If it's 6mm maybe go european, if it's 1/4", the Powauto ones go straight into the back of the valve.
Please Log in to join the conversation.
- Inta ACCOs
- Topic Author
- Offline
Less
More
- Posts: 52
- Thank you received: 0
14 years 1 month ago #42847
by Inta ACCOs
Replied by Inta ACCOs on topic Re: Tipper hoist controller
Thanks for that, they are 1/4" lines.
What's the proper name for the controller?
Hope you're not too wet where you are.
Cheers,
Joe
What's the proper name for the controller?
Hope you're not too wet where you are.
Cheers,
Joe
Please Log in to join the conversation.
14 years 1 month ago #42848
by
Replied by on topic Re: Tipper hoist controller
Please Log in to join the conversation.
Time to create page: 0.484 seconds