Skip to main content

New to these truck

More
1 month 1 week ago #252979 by cobbadog
Replied by cobbadog on topic New to these truck
No pics of your levers. The only way I know to post a video is to load it to your YouTube account then post the link. 
I'm sure there is a better way but being tech dumb I do it how it works for me.
Cheers Cobba & Cobbarette
Coopernook, The Centre of our Universe
Working on more play time.
The following user(s) said Thank You: 180wannabe, Mrsmackpaul

Please Log in to join the conversation.

More
1 month 1 week ago #252981 by Foxy
Replied by Foxy on topic New to these truck
  • IMG_8171.jpeg
    • The following user(s) said Thank You: cobbadog

    Please Log in to join the conversation.

    More
    1 month 1 week ago #252982 by Foxy
    Replied by Foxy on topic New to these truck
    Will try again 
  • IMG_8171.jpeg
    • The following user(s) said Thank You: cobbadog, wee-allis

    Please Log in to join the conversation.

    More
    1 month 1 week ago #252983 by JOHN.K.
    Replied by JOHN.K. on topic New to these truck
    Handbrake ,hoist and PTO ...........best to leave the hoist in lower position,then you cant have any incidents like wreckin the shed .......the PTO should be left disengaged too .
    The following user(s) said Thank You: 180wannabe, cobbadog, Mrsmackpaul

    Please Log in to join the conversation.

    More
    1 month 1 week ago #252999 by Foxy
    Replied by Foxy on topic New to these truck
    So next question. My starter motor isn’t engaging now . Motor spins was thinking sticky bendix? Thoughts . Or has it gone bad. I’m not sure if it’s a 6 or 12v system as it has a 12 coil in it already. So I have been using 12 v
    The following user(s) said Thank You: cobbadog

    Please Log in to join the conversation.

    More
    1 month 1 week ago #253000 by Foxy
    Replied by Foxy on topic New to these truck
    youtube.com/shorts/XHagLKfTjSc?si=xMftlE8Fao6iIIlU
    The following user(s) said Thank You: cobbadog, PaulFH, asw120

    Please Log in to join the conversation.

    More
    1 month 1 week ago #253001 by asw120
    Replied by asw120 on topic New to these truck
    Either stuck Bendix, or broken spring. Can be overlaid and migged together until you find a new one, if it's the spring.

    Jarrod.

    “I offer my opponents a bargain: if they will stop telling lies about us, I will stop telling the truth about them”

    ― Adlai E. Stevenson II
    The following user(s) said Thank You: 180wannabe, cobbadog

    Please Log in to join the conversation.

    More
    1 month 1 week ago #253002 by Foxy
    Replied by Foxy on topic New to these truck
    Yea I was thinking stuck bendix or spring . 

    Please Log in to join the conversation.

    More
    1 month 1 week ago #253004 by PaulFH
    Replied by PaulFH on topic New to these truck
    Did well to get it started up after so long.
    Looks like you’re in front there.
    Can see the PTO shaft running underneath.
    May pay to check that it’s disengaged.
    Good luck with your project.
    The following user(s) said Thank You: 180wannabe, cobbadog

    Please Log in to join the conversation.

    More
    1 month 1 week ago #253007 by Foxy
    Replied by Foxy on topic New to these truck
    Yea it was engaged at the time I hadn’t worked out hot to disengage it at the time. The levers are really rusted still working out that part. Can’t put up tray until it’s outside and have tires that go flat quickly lol it’s will be a very long project. 
    The following user(s) said Thank You: cobbadog, eerfree, PaulFH, wee-allis

    Please Log in to join the conversation.

    Time to create page: 0.540 seconds