Skip to main content

Brake Cylinder Sleeving

More
2 months 4 days ago #251906 by PaulFH
Looking for service contacts Eastern side of Melbourne please. TIA

Please Log in to join the conversation.

More
2 months 4 days ago #251907 by 180wannabe
Replied by 180wannabe on topic Brake Cylinder Sleeving
I realise not exactly what you asked, but if you don't have any luck, Power Brakes in Adelaide do a pretty fast turnaround via AusPost.

Brett.
The following user(s) said Thank You: cobbadog, PaulFH, asw120, Gum View

Please Log in to join the conversation.

More
2 months 4 days ago #251908 by jon_d
Replied by jon_d on topic Brake Cylinder Sleeving
try Better Brakes Bayswater.

1/381 Bayswater Road
Bayswater VIC 3153

www.betterbrakesvic.com.au/services
The following user(s) said Thank You: cobbadog, PaulFH

Please Log in to join the conversation.

More
2 months 4 days ago #251911 by cobbadog
Replied by cobbadog on topic Brake Cylinder Sleeving
What are they using now for sleeving, brass or stainless?

Cheers Cobba & Cobbarette
Coopernook, The Centre of our Universe
Working on more play time.

Please Log in to join the conversation.

More
2 months 3 days ago #251912 by Oilman
Replied by Oilman on topic Brake Cylinder Sleeving
Stainless. I send mine to Power Brakes.

1975 Atkinson, 180HP 6LXB Gardner, RTO910, 34000lb Rockwell on camelback
The following user(s) said Thank You: cobbadog, PaulFH

Please Log in to join the conversation.

More
2 months 3 days ago #251915 by Morris
Replied by Morris on topic Brake Cylinder Sleeving
This is not exactly east of Melboring but I get all my brake work, as do two mates who put me on to him, at Pakenham south east of Melb is Victorian Brake Company, 13 Bormar Drive, Packenham, off Bald Hill Road, phone 5490 1170 mobile 0437 454 354. Speak to Murray. I am not sure if they do re-sleeving but Murray knows all there is to know about brakes and will put you on to somebody nearer you.

I have my shoulder to the wheel,
my nose to the grindstone,
I've put my best foot forward,
I've put my back into it,
I'm gritting my teeth,

Now I find I can't do any work in this position!
The following user(s) said Thank You: cobbadog, PaulFH, wee-allis

Please Log in to join the conversation.

Time to create page: 0.510 seconds