Skip to main content

What is the best

  • Topic Author
17 years 7 months ago - 17 years 7 months ago #2284 by
Replied by on topic Re: What is the best
I've done a bit of research and found a photo of what you need to do. Then you will really live up to your name of Deadly dave!



Or



Found this at www.rodshop.com.au/ Might give you more ideas! ;D

Please Log in to join the conversation.

  • Topic Author
17 years 7 months ago #2285 by
Replied by on topic Re: What is the best
These pics above do look a Bedford cab but i think the BMC might be the go with a blower what do you reckon. ;D Dave

Please Log in to join the conversation.

More
17 years 7 months ago #2286 by bparo
Replied by bparo on topic Re: What is the best
Deadly,

to be serious for a second didn't you buy the 35 to put the motor in the 36? Are you just looking at options or wasn't the 35 motor any good?

Having lived through a pandemic I now understand all the painting of fat people on couches!

Please Log in to join the conversation.

More
17 years 7 months ago #2287 by GM Diesel
Replied by GM Diesel on topic Re: What is the best
Dave, As with bparo seriously. Which years have the same engine around the 36 ?
I know where there is some early Bedford engines over here (not Andy's spares). If you can let me know what sort of prefix in the engine number will help me work out if there right or not I will take a run and have a look for you.
Barry

GM Diesels - Converting diesel into noise since 1938.

Please Log in to join the conversation.

More
17 years 7 months ago #2288 by Andy Wright
Replied by Andy Wright on topic Re: What is the best

(not Andy's spares).


Phew! ;)

Dave, why not a plain old 214?

Andy&&&&Whatever rubs your buddah.&&&&Got Bedfords? http://bedfordtr

Please Log in to join the conversation.

  • Topic Author
17 years 7 months ago #2289 by
Replied by on topic Re: What is the best
Thanks to everyone , Bruce is right i have bought a wreck with a good motor in it but you must admit people came up with some great ideas. Dave

Please Log in to join the conversation.

Time to create page: 0.264 seconds