Skip to main content

SANDCRAFT TRANSPORT SYSTEMS T650

  • Swishy
  • Away
  • If U don't like my Driving .... well then get off the footpath ...... LOL
More
13 years 7 months ago #32318 by Swishy

Sandy
GuddayM8

Gr8 pix
Keep m Cummin

U have a good eye for detail

Cya
[ch9787]

OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST

There's more WORTH in KENWORTH

Please Log in to join the conversation.

More
13 years 7 months ago #32319 by ducky698
Hi, i found the templates for the Batman Tumbler aero foils the other day. have put them all up stairs with the other body panels. we have enuf panels to build another one. :)

Grant

Please Log in to join the conversation.

More
13 years 7 months ago #32320 by Sandy
BULL BAR

I have already made a bull bar for the Tamiya Toyota high luxe 4x4 out of some steel box tube and brass flat, as you can see by the dents in the pipe work this bar has saved me a couple of times already, for you guys with utes, as you can see I have used the existing bar mounts to bolt on to.
So it

Please Log in to join the conversation.

More
13 years 7 months ago #32321 by Sandy
Here is the truck

Please Log in to join the conversation.

More
13 years 7 months ago #32322 by craig308
great work sandy 8-)

cheers craig

Please Log in to join the conversation.

More
13 years 7 months ago #32323 by Stew70
Good job Sandy. Coming along nicely.

Stew.

Please Log in to join the conversation.

More
13 years 7 months ago #32324 by Sandy
CAB INSIDE DETAIL
The cab detail started by cutting the cab roof lugs in half and removing the back half, on the windshield I cut the back half completely away from the windshield, then glued a face plate to the cut away section, then filed in the bottom to make box section for the consol. (BE VERY CAREFULL WITH THE GLUE).



I then scratch built a dash gluing it to the windshield and lugs at the bottom, found this a bit difficult trying to get the right angle.

The C/B

Please Log in to join the conversation.

More
13 years 7 months ago #32325 by Sandy
STONE GAURD

I asked Chris how he had made his and he gave 3or 4 ideas, then I remembered how the stone guard looked on my truck, so here goes

1. Decide on the height for the stone guard, I

Please Log in to join the conversation.

More
13 years 7 months ago #32326 by Sandy
CONGRATULATIONS ARE IN ORDER
This has been a long and difficult birthing process with many interruptions and a few spurts of geniuses now and then.
Yes the wipers and lenses are missing still have to do some air brushing yet, the back end is a clue
Some of the extras made were
Turntable = fully oscillating or pined
Pogo stick = to hold air pipes for trailer
Chain and rope facilities (behind sleeper)
Ice box = stationary air conditioning (under rear of sleeper)
Air start tank with release valve & hose

Please Log in to join the conversation.

More
13 years 7 months ago #32327 by Sandy
Here we have the block (or counter weight) used when towing heavy trailers with air compressor on the side, as you can see some welds have let go & a few cracks after many miles of rough roads along with some stuffed tyres from the float

Lucky I didn

Please Log in to join the conversation.

Time to create page: 0.578 seconds