Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Continental HD277 parts

Continental HD277 parts 10 Nov 2014 12:56 #150470

  • paulc20
  • paulc20's Avatar Topic Author
  • Offline
  • Posts: 426
  • Thank you received: 27
I am after Continental HD277 parts, specifically injection pump and mounting adaptor.

This engine was used in Case 800 dozers as well as Massey Ferguson MF85 and MF88. The engine is physically similar to the HD260

There were a number of different pump drives, adaptor mountings and bushes and I seem to have a mix of types which are not completely compatible.

Paul

Please Log in to join the conversation.

Continental HD277 parts 15 Oct 2019 10:50 #203546

  • Greenman
  • Greenman's Avatar
  • Offline
  • Posts: 7
  • Thank you received: 1
Have you found these parts yet Paul? I also have a Massey 88 with the same problem or something pretty similar.
I haven’t got mine apart yet to find out exactly what was broken but think it is the injector pump drive.

Please Log in to join the conversation.

Continental HD277 parts 15 Oct 2019 17:06 #203550

  • JOHN.K.
  • JOHN.K.'s Avatar
  • Offline
  • Posts: 1229
  • Thank you received: 219
What pump do you have?.....it may be possible to replace it with a different ,more available pump?

Please Log in to join the conversation.

Continental HD277 parts 09 Nov 2019 14:32 #204110

  • paulc20
  • paulc20's Avatar Topic Author
  • Offline
  • Posts: 426
  • Thank you received: 27
My problem is the bush in the pump does not match the shaft that drives from the camshaft. I have a new bottom bush, which is eccentric to adjust backlash in the gear mesh.

I also need the gear that fits the hydraulic pump that drives from the camshaft gear.

Paul

Please Log in to join the conversation.

  • Page:
  • 1
Time to create page: 0.236 seconds

Historic Commercial Vehicles Club of Australia Inc.  Post: P.O. Box 2020 Bayswater Vic. 3153    Clubrooms: Unit 8 / 4  Macquarie Place Boronia    Club Phone: 0400 025 525    Club Rooms:  03) 9738 1558