- Posts: 1122
- Thank you received: 181
Vic Gibbs Collection Sale
7 years 2 months ago - 7 years 2 months ago #179818
by Tacho
Vic Gibbs Collection Sale was created by Tacho
I went to the Estate Sale near Loxton SA yesterday. There were lots of Chamberlain parts and plenty of IH and MH parts tractors, as well as other brands. The scrap man bid to around $100 per tonne and many went his way, although he was happy to sell bits off them. A couple of Sift and a MH 102 tricycle should not have gone to scrap, but no one wanted them. I took a few pics.
Cat Twenty $2800 TD6 $2200
Chamberlain 40K with GM 6-71 $4,100
Chamberlain 45KA excellent $11,000 Lanz Bulldog DR tidy $10,000
Chamberlain 55KA &40 K both Meadows diesel and worked as a tandem $1,000 & $3,200
Chamberlain 55KA fixable $3,200, 55DA motor in pieces but all there and a rare tractor as it was Chamberlain's failed attempt to make the petrol/kerosene motor into a diesel. Most were converted to Ford, Meadows or Perkins $2,600 Super 90,panels with it and too cheap at $2,400
Cat Twenty $2800 TD6 $2200
Chamberlain 40K with GM 6-71 $4,100
Chamberlain 45KA excellent $11,000 Lanz Bulldog DR tidy $10,000
Chamberlain 55KA &40 K both Meadows diesel and worked as a tandem $1,000 & $3,200
Chamberlain 55KA fixable $3,200, 55DA motor in pieces but all there and a rare tractor as it was Chamberlain's failed attempt to make the petrol/kerosene motor into a diesel. Most were converted to Ford, Meadows or Perkins $2,600 Super 90,panels with it and too cheap at $2,400
Last edit: 7 years 2 months ago by Tacho.
The following user(s) said Thank You: Mairjimmy
Please Log in to join the conversation.
7 years 2 months ago - 7 years 2 months ago #179820
by Tacho
Vic called this customised Fergy a Super 20 after he put a Chamberlain grill on it. $2,300. A tidy Ferguson TEA 20 made $1,250
Field Marshall series 2 needed a tyre or two and down on compression $5,000
Inter 766 sorry I missed front $3,000, Allis Chalmers WC 1946 $1,700, Allis Chalmers B wrong colour but OK $900, English Fordson $1,400
McCormick Deering W6 $1,950 & W40 in nice condition $5,000
Replied by Tacho on topic Vic Gibbs Collection Sale
Vic called this customised Fergy a Super 20 after he put a Chamberlain grill on it. $2,300. A tidy Ferguson TEA 20 made $1,250
Field Marshall series 2 needed a tyre or two and down on compression $5,000
Inter 766 sorry I missed front $3,000, Allis Chalmers WC 1946 $1,700, Allis Chalmers B wrong colour but OK $900, English Fordson $1,400
McCormick Deering W6 $1,950 & W40 in nice condition $5,000
Last edit: 7 years 2 months ago by Tacho.
Please Log in to join the conversation.
7 years 2 months ago #179821
by Tacho
Super 90 (good) $5,100 & Countryman with a Meadows diesel $3,200
McCormick Deering 0-12 $2,100, Farmall H good tyres and tidy tin $940, Farmall A OK condition $1,050, McCormick Deering W6 faded paint but neat $850
McCormick Deering W4 $850, W9 $935, WD9 $2,000 both 9's straight and tidy.
Massey Harris 744D $3,600 & Case DEX cheap at $620
Oliver Hart Parr 1936 $560
Replied by Tacho on topic Vic Gibbs Collection Sale
Super 90 (good) $5,100 & Countryman with a Meadows diesel $3,200
McCormick Deering 0-12 $2,100, Farmall H good tyres and tidy tin $940, Farmall A OK condition $1,050, McCormick Deering W6 faded paint but neat $850
McCormick Deering W4 $850, W9 $935, WD9 $2,000 both 9's straight and tidy.
Massey Harris 744D $3,600 & Case DEX cheap at $620
Oliver Hart Parr 1936 $560
The following user(s) said Thank You: Mairjimmy
Please Log in to join the conversation.
7 years 2 months ago - 7 years 1 month ago #179822
by Tacho
Replied by Tacho on topic Vic Gibbs Collection Sale
John Deere 114 wire tie baler $320 (still kicking myself for letting that go as it would work with a bit of TLC)
Plenty of parts on offer
Inters KB3 parts only $140, KB5 restorable with effort $260, KB7 a good project $340
Commer with Perkins 6-354 and 35' Freighter trailer in tidy condition and minimal rust $2,200
https://www.hcvc.com.au/forum/attachment/4101
Some other prices for tractors in average condition
Howard DH22 and rotary hoe $320
Massey Harris 102 tricycle $320
Fordson E27N with good lights & grill and worth saving $480
Fordson E27N with cable loader a bit rough $100
Two Sift tractors fixable if keen $100 each
McCormick Deering W4 looked OK $700
McCormick Deering 22-36 1931 in fair nick $750
McCormick Deering 10-20 rough $540
Plenty of parts on offer
Inters KB3 parts only $140, KB5 restorable with effort $260, KB7 a good project $340
Commer with Perkins 6-354 and 35' Freighter trailer in tidy condition and minimal rust $2,200
https://www.hcvc.com.au/forum/attachment/4101
Some other prices for tractors in average condition
Howard DH22 and rotary hoe $320
Massey Harris 102 tricycle $320
Fordson E27N with good lights & grill and worth saving $480
Fordson E27N with cable loader a bit rough $100
Two Sift tractors fixable if keen $100 each
McCormick Deering W4 looked OK $700
McCormick Deering 22-36 1931 in fair nick $750
McCormick Deering 10-20 rough $540
Last edit: 7 years 1 month ago by hayseed.
The following user(s) said Thank You: Mairjimmy
Please Log in to join the conversation.
7 years 2 months ago - 7 years 2 months ago #179823
by Tacho
Replied by Tacho on topic Vic Gibbs Collection Sale
Stupid computer....had the picture codes inserted but they didn't show up. Can the mods have a look please as I tried to post them again and was denied access....whatever that means.
Geoff, at a guess the total size of your pics, have exceeded to 3MB post Limit..
PM me if you need a hand (or ring Me if you still have My number).
Geoff, at a guess the total size of your pics, have exceeded to 3MB post Limit..
PM me if you need a hand (or ring Me if you still have My number).
Last edit: 7 years 2 months ago by hayseed. Reason: added a bit
Please Log in to join the conversation.
Less
More
- Posts: 1300
- Thank you received: 1174
7 years 2 months ago #179836
by Southbound
I'd rather have tools that I don't need, than not have the tools I do need.
Replied by Southbound on topic Vic Gibbs Collection Sale
Thanks for the detailed post Tacho. Seems that the collectables are worth more than new price, who would have known? :S
I'd rather have tools that I don't need, than not have the tools I do need.
Please Log in to join the conversation.
7 years 2 months ago #179841
by Tacho
Replied by Tacho on topic Vic Gibbs Collection Sale
That's a yes and a no Southbound. The yes is they cost less in simple dollar terms when they were new, but a no because if that sale was 5 years ago most of those prices would have been double. Most of difference is because of that thing known as the GFC (Global Financial Crisis) and today there is much less confidence about and a lot less money for toys and hobbies.
Geoff
Geoff
Please Log in to join the conversation.
7 years 2 months ago #179846
by Mairjimmy
Time to get up andd get going.......todays bad decisions aren't going to make themselves!!!
Replied by Mairjimmy on topic Vic Gibbs Collection Sale
Tacho wrote: Stupid computer....had the picture codes inserted but they didn't show up. Can the mods have a look please as I tried to post them again and was denied access....whatever that means.
Geoff l blame the computer when it plays up BUT it turns out most time's it's me LOL
Time to get up andd get going.......todays bad decisions aren't going to make themselves!!!
Please Log in to join the conversation.
7 years 1 month ago #179865
by Tacho
Replied by Tacho on topic Vic Gibbs Collection Sale
Ditto Colin.....I've talked to Seed and hope to get the last few pics up soon. (and the computer is still stupid ! ! )
Geoff
Geoff
Please Log in to join the conversation.
7 years 1 month ago - 7 years 1 month ago #179901
by hayseed
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Replied by hayseed on topic Vic Gibbs Collection Sale
Tacho,I have managed to get 3 of them to Work. The Commer pic is the Problem Child. I have forwarded It to Gryphon to sort out..
EDIT, All good now...
EDIT, All good now...
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Last edit: 7 years 1 month ago by hayseed. Reason: added a bit
Please Log in to join the conversation.
Time to create page: 0.651 seconds