Off Topic - EH Holden Bonnet RElease
- HeyCharger
- Topic Author
- Offline
Less
More
15 years 3 months ago #6681
by HeyCharger
Proud owner of;
1948 Massey Harris 44K.
1946 Ford Semi-Trailer Bus.
Off Topic - EH Holden Bonnet RElease was created by HeyCharger
Hi guys. My son has an EH Holden in which the bonnet pull has become disconnected, whilst the bonnet is down and locked. What is an easy way to rescue this situation?
The only way I can think of is to take the bumper and bottom panel off and then reach up. Any other ideas?
Thanks. Rod.
The only way I can think of is to take the bumper and bottom panel off and then reach up. Any other ideas?
Thanks. Rod.
Proud owner of;
1948 Massey Harris 44K.
1946 Ford Semi-Trailer Bus.
Please Log in to join the conversation.
15 years 3 months ago #6682
by Swishy
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Replied by Swishy on topic Re: Off Topic - EH Holden Bonnet RElease
RodMan
GuddayM8
Ifn there'z a nuther EH in town go take a l@@kSee @ the beast n ask owner for a gander of the bonnet up so U can C where U need to probe around
cos I thort U can jiggle a screw driver under front of bonnet n = bingo
ButEyeDoSt&2BCorrected
LOL
cya
[ch9786]
GuddayM8
Ifn there'z a nuther EH in town go take a l@@kSee @ the beast n ask owner for a gander of the bonnet up so U can C where U need to probe around
cos I thort U can jiggle a screw driver under front of bonnet n = bingo
ButEyeDoSt&2BCorrected
LOL
cya
[ch9786]
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Please Log in to join the conversation.
15 years 3 months ago #6683
by ray
Replied by ray on topic Re: Off Topic - EH Holden Bonnet RElease
G'day Rod, I believe you can get to the bonnet release by sticking either an old screwdriver or a piece of steel rod bent at an angle through the grill and push the release mechanism that way.
Please Log in to join the conversation.
Less
More
- Posts: 1025
- Thank you received: 1
15 years 3 months ago #6684
by kennymopar2
Replied by kennymopar2 on topic Re: Off Topic - EH Holden Bonnet RElease
maybe a thick welding rod bent at the "correct" angle .. + a lot of swearing
Please Log in to join the conversation.
Time to create page: 0.410 seconds