International AB130

Fantastic Info Roger! My local mechanic thinks he has some old Inter parts lying around might be worth a look... I'll also give prices a call. ASW anything you can spare for me to use as either a template of modify.?

I am also missing a spare wheel and quite a few wheel nuts. any pointers appreciated..

Carmoda, I reckon I would have a spare wheel with lock ring.
Free, but you gotta keep a lookout for a 7.50-type or a hubcap. Or a 110 diff? We could work something out.
I should have some wheel nuts...?
I probably (fairly sure) have a spare 2wd handbrake band (I need to keep 1 'cause I want to assemble an AB110 from bits I have) I might be able to make up a set of all the actuating gear. You will have to help me look, but it's all in one place.(a D1210 van chock full) I wrecked an AA120 4x4, but wasn't all there. Maybe a handbrake linkage? If not, I'm sure I could find a 2wd one which would be easy to lengthen.
Could use my spare 4wd band as a template no worries.
I'm near Ipswich (Chuwar). Probably best you PM me and we can sort something out if nothing easier turns up.
ASW. (Jarrod)

Hi Mate, pretty sure the wheels were still on the one at Prices, I reckon they would have the handbrake assembly as well.
ASW, those diffs and wheels are a lot bigger than a 110.
Had to get some electrical stuff this morning and this C 1300 was parked in a painters yard in Salisbury, just had the Dulux reco, had a Perkins in it.

That's nice! There's one like it with duals on the back near me.

Yep, I know about the wheels. I have plenty of 110 wheels, but I'm always looking for 7.00-7.50 type 6-stud singles.
Notice the wide lockrings on the one in your picture; they're the 8.25-9.00 type which I'm pretty sure carmoda has. I have a couple(?) of those I don't need.

Of all the stuff I wrecked out over the years, I think I have enough parts to assemble an AB110. I gave away my last 110 diff, however and don't really want to use the 8-stud gear from under the 1210 van.

It's a "one day" project. If I thought long enough, I could probably come up with a page of stuff I don't have, but I have most of it.

ASW.

Don't know if you are still looking for info on the hand brake assembly. But I have scanned the AB130 hand brake page from my parts manual. Might help!

Sorry about the quality but the book is old and didn't want to squash it down to much on the scanner.

Wow. This has to be up there with the the other worlds most helpful forums.

ASW - definitely take you up on that. I'm just down the road (Peak Crossing).

JBlair, Awesome schematic. I'll print that out. Thank you so much!

Hi carmoda,

No worries and glad to help.


ASW, on the rims with the larger lock rings, did the rims have a matching larger flange also?


Regards
Roger

ASW, on the rims with the larger lock rings, did the rims have a matching larger flange also?

Yes.

ASW.

anyone know where i can get a small section of my fuel line repaired? it's a small rubber (with brass ends) section 12cms long just before the filter. Rubbers gone brittle.

G'day Carmoda if it has got the crimped ends on it then you can carefully cut around the crimp and remove it and you should have a fitting with a small barb just replace the hose with some quality fuel line and hose clamp on.


Jon