NEW PROJECTS

Flushed a couple out Browny :-X
Rags

Common out of the closet you blokes

So what's in it Andy?
Do I see a splash of yellow around the engine badge?
What's it need, apart from mirrors?
Looks great.

I Too have a New toy/project........

Cam,I should Probably Start a new thread, (or just hijack this one )
350Bigcam, 15sp, SP40 on Hendrickson. It's an early one "85 model and the Coonabarabran Sleeper's are getting thin on the Ground as well.

As for What's It need??
I wish Mirror heads were ALL I need

The List (So far) Is.
Starter Motor, Fuel Pump, Mirror Heads, 2 tank Steps, Drivers doors Needs, Door handle, Door latch/lock Assembly, Window regulator,& rust repair in bottom (from not keeping the drain holes clean) all 4 Sleeper Doors need the same rust repair. 10 tyres, New turntable Angles.

that's just the 'walk around" list :
As We both know It's bound to get (much) Longer once I'm working on the Old girl.
I did however have a Win In the bunk Is a Brand new (still in the Box) Grill.
Which I believe retails for about half of what I paid for the Whole gadget

Seed
Need to put a BBQ and get some helps in [smiley=beer.gif] [smiley=beer.gif] [smiley=beer.gif]

Hi, Hayseed. If its any help XB falcon door lock and latch mechanisms are the same as Louisville. You just have to reuse the outside handle lever of the old lock . I used rear door locks as they usually don't get much use. I also used the Falcon rear door hinge pins to repair my droopy doors as they were 5/16" whilst the Louisvilles were 1/4"

Hi, Hayseed. If its any help XB falcon door lock and latch mechanisms are the same as Louisville. You just have to reuse the outside handle lever of the old lock . I used rear door locks as they usually don't get much use. I also used the Falcon rear door hinge pins to repair my droopy doors as they were 5/16" whilst the Louisvilles were 1/4"

G'day F700,Thanks, but was already aware of that.
As you say XA-XC door locks are the same,& you have to use the lever of the Old Lock. Only thing is I'm missing the Old Lock(& outside Door handle,plus Key barrel).
And for the droopy Door hinges, I normally drill them out Tap a thread in the Bottom bit of the Fixed hinge to tighten them Up.
I'm hoping someone can tell Me what the equivalant Model Window regulator is??

....that great old LTL will make a real nice Haulin'-Crawlin' banger 'seed....good luck with her

Seed re the window regulator would be a ford of that era
But have often thought of doing a electric conversation with something like in a Au fairly simple and basic

I agree Browny,
& is most likely to be from an "F" truck.
Was just hoping that who has "been there done that" can tell me.
& save Me the trouble of finding out the hard way....

Not a truck, but playing with an FC Holden wagon.