- Posts: 316
- Thank you received: 537
Torque rod bush
5 years 11 months ago #192768
by Oilman
1975 Atkinson, 180HP 6LXB Gardner, RTO910, 34000lb Rockwell on camelback
Replied by Oilman on topic Torque rod bush
Yes, I looked at that Mackay one, but wrong size (unless I made a sleeve). Tried Coburg truck parts but they couldn't help. I think I will make one using the liquid urethane for around $60. If it doesn't work, I haven't lost much.
1975 Atkinson, 180HP 6LXB Gardner, RTO910, 34000lb Rockwell on camelback
Please Log in to join the conversation.
5 years 11 months ago #193105
by Oilman
1975 Atkinson, 180HP 6LXB Gardner, RTO910, 34000lb Rockwell on camelback
Replied by Oilman on topic Torque rod bush
I made up a new one using the liquid urethane (ReoFlex 60). I suspect that it may not be that durable, but worth a go as not much to lose for $60.
1975 Atkinson, 180HP 6LXB Gardner, RTO910, 34000lb Rockwell on camelback
The following user(s) said Thank You: 180wannabe, Southbound
Please Log in to join the conversation.
5 years 11 months ago #193114
by paulc20
Replied by paulc20 on topic Torque rod bush
Where did you buy the ReoFlex. I need something similar to remake some engine mounts.
Paul
Paul
Please Log in to join the conversation.
5 years 10 months ago #193119
by Oilman
1975 Atkinson, 180HP 6LXB Gardner, RTO910, 34000lb Rockwell on camelback
Replied by Oilman on topic Torque rod bush
Ebay. Crowd from Adelaide.
1975 Atkinson, 180HP 6LXB Gardner, RTO910, 34000lb Rockwell on camelback
The following user(s) said Thank You: 180wannabe, paulc20
Please Log in to join the conversation.
Time to create page: 0.477 seconds