- Posts: 2233
- Thank you received: 5522
PTO drive for Ford/Dodge/Inter NP435 transmission
3 years 8 months ago #212875
by PaulFH
Replied by PaulFH on topic PTO drive for Ford/Dodge/Inter NP435 transmission
Hi Dave, seller on FB Marketplace at West Footscray, Mark Seychell
advertising various old PTO pumps, Powauto and the like.
May be of some help??? Best of luck, Paul.
advertising various old PTO pumps, Powauto and the like.
May be of some help??? Best of luck, Paul.
The following user(s) said Thank You: Dave_64
Please Log in to join the conversation.
3 years 8 months ago #212880
by Dave_64
Replied by Dave_64 on topic PTO drive for Ford/Dodge/Inter NP435 transmission
Thanks PaulFH,
Sent him a message, he may have a control valve amongst his stock. (just replied by messenger, none left!)
Looks like Nixons of Wagga have the correct gear set to suit the NP435 box, asking further questions at the moment.
Just as an aside, nearly came unstuck. Bloke put me onto a set of gears, actually fitted and seemed to be the same tooth count, but was then told that the helix angles were wrong and would have eventually chopped out the gear on the countershaft or the idler gear in the PTO.
Would have been a similar scenario to what John.K. posted up about his brothers hassles with a similar transmission.
Keep looking, something will turn up!
Dave_64
Sent him a message, he may have a control valve amongst his stock. (just replied by messenger, none left!)
Looks like Nixons of Wagga have the correct gear set to suit the NP435 box, asking further questions at the moment.
Just as an aside, nearly came unstuck. Bloke put me onto a set of gears, actually fitted and seemed to be the same tooth count, but was then told that the helix angles were wrong and would have eventually chopped out the gear on the countershaft or the idler gear in the PTO.
Would have been a similar scenario to what John.K. posted up about his brothers hassles with a similar transmission.
Keep looking, something will turn up!
Dave_64
The following user(s) said Thank You: PaulFH
Please Log in to join the conversation.
Time to create page: 0.358 seconds