- Posts: 388
- Thank you received: 586
Tri spring sets
Swishy wrote: Mrs
M80
Th@ axle packer U talk about could B directly related to the K/Pin height
a perfict height is wen the rocker boxes pivot point R all exactly the same height
cya
Thanks for that Swishy, often wonder why some trailers that sit flat on non tapered beams feel nice even though they sit quite high.
Please Log in to join the conversation.
(in your case if the bearing hub cap runs tru ... compare length from Passenger to driver side
wen U adjust the torque rod to make both sides even on the string line
then U can compare 1st axle to the nex etc
U can get a bit of differation from wen the spring was secured down with the 'U' bolts
az there is a bit of slop where the center bolt head rides on the axle housing
ifn u get my drift
Cya
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Please Log in to join the conversation.
Ill think of something shortly
Please Log in to join the conversation.
Ill think of something shortly
Please Log in to join the conversation.
- Posts: 7311
- Thank you received: 6271
Swishy wrote: Mrs
M80
Th@ axle packer U talk about could B directly related to the K/Pin height
a perfict height is wen the rocker boxes pivot point R all exactly the same height
cya
I dont think so Swishman, I feel it has to do with chassis camber and on 10'1" spreads, its a long way from the rear axle and chassis is climbing all the way
I am most probably wrong, to my eye the rails climb both ways, from the front of the trailer and the rear as well and sort of meet about towards the middle
Paul
Your better to die trying than live on your knees begging
Please Log in to join the conversation.
cro wrote: Rocker boxes Seed. Bushes are all in good order, must have been replaced just before it's big rest. Only one rocker needs attention or replacing.
I'll have a look & get back to you.. may not be until the Weekend though..
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Please Log in to join the conversation.