Another Bedford

JOHN.K.
Offline

3 years 8 months ago #223311 by JOHN.K.

Replied by JOHN.K. on topic Another Bedford

My 2006 Courier has a chain wind up spare carrier under the back of the tray....works well too.without being massive.

Please Log in to join the conversation.

Colin HD
Topic Author
Offline

3 years 8 months ago #223316 by Colin HD

Replied by Colin HD on topic Another Bedford

Urchy87 wrote:
Great to see some progress. Keep it going. That tyre carrier should never let you down. Haha. I need to install one on the F250 also. Not sure what I will steal one off yet.

It came up on FaceCloth and couldn’t resist it.

The following user(s) said Thank You: Urchy87

Please Log in to join the conversation.

Colin HD
Topic Author
Offline

3 years 8 months ago #223317 by Colin HD

Replied by Colin HD on topic Another Bedford

Well took the fender/wing/mudguard/guard off and found where the rust was hiding!

Has been professionally repaired in the past, but might need a little more work.

Attachments:

The following user(s) said Thank You: cobbadog

Please Log in to join the conversation.

Colin HD
Topic Author
Offline

3 years 8 months ago #223318 by Colin HD

Replied by Colin HD on topic Another Bedford

Attachments:

The following user(s) said Thank You: cobbadog, PaulFH

Please Log in to join the conversation.

Colin HD
Topic Author
Offline

3 years 8 months ago #223319 by Colin HD

Replied by Colin HD on topic Another Bedford

Although must admit, I knew the rust was there when I purchased.
The other side is fine.

Attachments:

The following user(s) said Thank You: cobbadog, PaulFH, someguy

Please Log in to join the conversation.

Zuffen
Offline

3 years 8 months ago #223322 by Zuffen

Replied by Zuffen on topic Another Bedford

First thing you should buy is a set of decent axle stands.

What you're using is patently unsafe.

Being crushed by a Bedford isn't a pleasant way to die.

The following user(s) said Thank You: Morris, Splod

Please Log in to join the conversation.

Colin HD
Topic Author
Offline

3 years 8 months ago #223323 by Colin HD

Replied by Colin HD on topic Another Bedford

Zuffen wrote:
First thing you should buy is a set of decent axle stands.

Totally agree!
I didn’t, at any stage work under there whilst on the timbers.
Just lifted it to be able to pressure wash.

Please Log in to join the conversation.

cobbadog
Offline

3 years 8 months ago #223329 by cobbadog

Replied by cobbadog on topic Another Bedford

Nice straight forward rust repai in front of you. Could I suggest that when you start cutting out the cancer and welding in the new that you weld both sides especially where that overlap is on the mid section of the inner mudguard.

Cheers Cobba & Cobbarette
Coopernook, The Centre of our Universe
Working on more play time.

Please Log in to join the conversation.