Skip to main content

IH Gearbox Indentification

More
2 years 1 month ago #232745 by Browny59
IH Gearbox Indentification was created by Browny59
Hi all.
New to the forum and to the restoration scene.
Hoping someone can help me identify what gearbox I have. It came with the purchase of a C1300 along with 2 x 6 cylinder engines and a 345 with a transmission attached.
Thanks in advance.

Please Log in to join the conversation.

More
2 years 1 month ago #232746 by Inter-Action
Replied by Inter-Action on topic IH Gearbox Indentification
Perhaps a better photo showing gear stick location and number of bolts holding top on the box. I take it that it's the common 4 speed. Gear shift pattern
should be on the bottom corner of w/screen , drivers side. Dave.

Please Log in to join the conversation.

More
2 years 1 month ago #232748 by Inter-Action
Replied by Inter-Action on topic IH Gearbox Indentification
Forgot to mention. The plate attached to the passengers door should give you the g/box and diff model.

Please Log in to join the conversation.

More
2 years 1 month ago #232750 by Browny59
Replied by Browny59 on topic IH Gearbox Indentification
Cheers Dave thanks for your reply.
I will add a couple of other pictures of the gearbox.
It's not the box out of the truck but an extra that came with the purchase of the truck
Tony.

Please Log in to join the conversation.

More
2 years 1 month ago #232759 by asw120
Replied by asw120 on topic IH Gearbox Indentification
At this point, if it's a 4 speed I'm going to say it's a T98 / T15. Predecessor to the NP435 which would normally be in your C1300.
I have one in my ASW120. Don't know if they ever came in C-lines, but certainly the previous model.

Jarrod.

“I offer my opponents a bargain: if they will stop telling lies about us, I will stop telling the truth about them”

― Adlai E. Stevenson II
The following user(s) said Thank You: Browny59

Please Log in to join the conversation.

More
2 years 1 month ago - 2 years 1 month ago #232761 by JOHN.K.
Replied by JOHN.K. on topic IH Gearbox Indentification
Early C lines had the T98A,later C lines and Dlines had the T17...NP...obvious difference is the cast iron vs alloy top.............By the way ,both boxes have two versions which are not directly interchangeable 6cyl petrol ..vs ..V8petrol/Perkins.
Last edit: 2 years 1 month ago by JOHN.K..
The following user(s) said Thank You: Browny59

Please Log in to join the conversation.

More
2 years 1 month ago #232784 by Browny59
Replied by Browny59 on topic IH Gearbox Indentification
Attachments:

Please Log in to join the conversation.

More
2 years 1 month ago #232786 by Browny59
Replied by Browny59 on topic IH Gearbox Indentification
Ten spline shaft.
6 bolts holding the top cover on.

Please Log in to join the conversation.

More
2 years 1 month ago - 2 years 1 month ago #232812 by JOHN.K.
Replied by JOHN.K. on topic IH Gearbox Indentification
The large (1") front bearing clutch shaft is for the two piece housing and six/ V8 petrol /Perkins............but not for the one piece housing on 1100./1200/1300
Last edit: 2 years 1 month ago by JOHN.K..
The following user(s) said Thank You: 180wannabe

Please Log in to join the conversation.

More
2 years 1 month ago #232815 by Browny59
Replied by Browny59 on topic IH Gearbox Indentification
Thanks John

Please Log in to join the conversation.

Time to create page: 0.514 seconds