Skip to main content

AR 130 1954 vintage

More
12 years 9 months ago #74781 by Mick themungrel
Had a AR130 arrive inmy shed today partly restored , is a 1 owner vehicle . Has been converted to 12v , steering has been done up and repainted . Its needs new back window rubbers . Thats all i have worked out so far . Has anybody here done any work on these old girls?







Please Log in to join the conversation.

More
12 years 9 months ago #74782 by Coupeute
Replied by Coupeute on topic Re: AR 130 1954 vintage
Looks like you have a beaut little truck there. Rubbers can be bought from Scotts Old Auto Rubber. There are still a fair few around, so parts stream is not too bad. The one thing I had to search a bit for was quarter vent windows with the handles still attached. Good luck with putting it back together. Plenty of Inter nuts to help you out here. Dave

AL110 inter ute &&FC Holden Wagon&&HJ Holden 1 Tonner&&

Please Log in to join the conversation.

More
12 years 9 months ago - 12 years 9 months ago #74783 by Mick themungrel
Thanks coupeute that is the info Im after . I have since found out that there is also another complete unit that was bought for spares which I will have to check out . The thing that gets me is that Ron (the owner) is the original owner . The first job he did with it when brand new was a load of furniture from Gawler to Arkaloola Station in the Flinders Ranges .
Fairly sure the quarter windows are complete , that will take a bit of sorting as I am a little restricted for room in the shed .
Last edit: 12 years 9 months ago by Mick themungrel.

Please Log in to join the conversation.

Time to create page: 0.388 seconds