Re: Dodge AT4-114, wheel PCD

Hi all, anyone know the standard PCD and rim size for the AT4-114. I know it an 8 bolt pattern, but is it the same as the chev and ford trucks?

yes they are the same as chev & ford until ford changed pcd in , i think , late 90's , usually available in 15'' or 16'' or 16.5'' diametre

I often see ford rims advertised as 'pre AU' so my guess is that is when the PCD changed.

I often see ford rims advertised as 'pre AU' so my guess is that is when the PCD changed.

The "pre AU" rims would refer to Falcon 5 stud which kept the same pcd but went with a different offset from AU model onwards.

Is the PCD 8x165.1? What about offset?

JOE-353 wrote:

Is the PCD 8x165.1? What about offset?
 

Joe,

The last post in this thread was from 12 years ago and many of the contributors haven't been seen on here for many years.

If you want to ask questions then it is best to start a new topic in the relevant category board rather than digging up the dead.

Terry