Skip to main content

AA182 International

More
2 years 11 months ago - 2 years 11 months ago #221653 by Lang
AA182 International was created by Lang
This looks like a great prospect. I don't think there are too many of the AA180 series around the circuit. Looks to be very straight just surface rust.

On Marketplace Millmerran Qld $3,000

International AA182 Tipper
Last used January 2019 and all in working order
No longer registered
Pick up only


Attachments:
Last edit: 2 years 11 months ago by Lang.
The following user(s) said Thank You: PaulFH

Please Log in to join the conversation.

More
2 years 11 months ago #221693 by Tassie Dan
Replied by Tassie Dan on topic AA182 International
That’s cool.

Please Log in to join the conversation.

More
2 years 11 months ago #221756 by JOHN.K.
Replied by JOHN.K. on topic AA182 International
Yep ,that and the Leyland Mastiff.....very tempting ...still ,I think Im past buying any more stuff I dont need ...what I do need is a ride on mower that runs for more than 10 minutes a week,and forklift with a short mast.

Please Log in to join the conversation.

More
2 years 11 months ago #221758 by cobbadog
Replied by cobbadog on topic AA182 International
Both are readily available John.K.
I bought a Cox ride on mower with what the mower shop claimed was a stuffed motor. As I did not want the engine because I fitted a hit n miss engine onto the mower, dropped the deck off and put a cross shaft underneath to run a belt of a flywheel to then drive the belt back to the friction drive and drive it around.
Had a very wet day and could not work so I looked at the engine to see what was wrong. Valve clearance was the biggest issue along with a fuel blockage. Engine started and ran like a clock. Donated it to a Club member who had a blown engine and he donated a better friction drive than I had. Win Win.

Cheers Cobba & Cobbarette
Coopernook, The Centre of our Universe
Working on more play time.

Please Log in to join the conversation.

Time to create page: 0.412 seconds