- Posts: 29
- Thank you received: 0
Wanted : Gearbox for normal control 6x6 isuzu
2 years 4 months ago #229728
by smiley
Wanted : Gearbox for normal control 6x6 isuzu was created by smiley
would anyone know where a gearbox is for one of these?
Please Log in to join the conversation.
2 years 4 months ago #229743
by jon_d
Replied by jon_d on topic Wanted : Gearbox for normal control 6x6 isuzu
Do you know what the gear box model number is?
Please Log in to join the conversation.
2 years 4 months ago #229745
by Lang
Replied by Lang on topic Wanted : Gearbox for normal control 6x6 isuzu
Give us the year and model truck. They appear to have a remote transfer case so more than likely a standard Isuzu box from the period.
Lang
Lang
Please Log in to join the conversation.
2 years 4 months ago #229763
by smiley
Replied by smiley on topic Wanted : Gearbox for normal control 6x6 isuzu
I have a Isuzu 6bd1 and gearbox out of a SBR422 and I want to put it in a conventional cab truck, the gear stick on any of these bonented Isuzu are on the top not leavers on the side so i,m thinking any model would probably fit
Please Log in to join the conversation.
2 years 4 months ago #229764
by smiley
Replied by smiley on topic Wanted : Gearbox for normal control 6x6 isuzu
the gearbox i have at the moment is a 5 speed direct , number BD5A, if I could just replace the top of the box with a gear stick that would be good or i,m happy to go a new box
Please Log in to join the conversation.
2 years 4 months ago #229765
by smiley
Replied by smiley on topic Wanted : Gearbox for normal control 6x6 isuzu
BD5A
Please Log in to join the conversation.
2 years 4 months ago - 2 years 4 months ago #229777
by jon_d
Replied by jon_d on topic Wanted : Gearbox for normal control 6x6 isuzu
An idea might be to an Isuzu FSR/FTR cable gear lever assembly. Mount it where you want and run the cable down to the box. Very easy to do. That's how I did the bus.
Last edit: 2 years 4 months ago by jon_d.
Please Log in to join the conversation.
2 years 4 months ago #229778
by smiley
Replied by smiley on topic Wanted : Gearbox for normal control 6x6 isuzu
Thanks thats not a bad idea i,ll have to look into it
Please Log in to join the conversation.
2 years 4 months ago #229780
by jon_d
Replied by jon_d on topic Wanted : Gearbox for normal control 6x6 isuzu
Smiley,
found a photo. The vertical stay has since been removed. The lever assembly included the cable mount and the curved metal support. I just made the bracket and attached the cable. The cables are a bit long, so you have to loop them about.
found a photo. The vertical stay has since been removed. The lever assembly included the cable mount and the curved metal support. I just made the bracket and attached the cable. The cables are a bit long, so you have to loop them about.
Please Log in to join the conversation.
Time to create page: 0.575 seconds