- Posts: 857
- Thank you received: 0
International bits
12 years 6 months ago #87666
by Coupeute
AL110 inter ute &&FC Holden Wagon&&HJ Holden 1 Tonner&&
International bits was created by Coupeute
Had a bit of a look around the shed & found a few bits may be of use to somebody
Tillotson carby & manifolds off a SD240 from AL160.
Carter carby & manifolds off a SD220 from AL110.
3 handbrake setups from T98 4 speed boxes.
Original horn from AS160, needs resistor wire.
Front I beam & axles off an AA130 with drums.
Rear Axles & diff housing off AA130 with drums.
Spider hubs & drums for AACO.
Windscreen for AA130.
Bench seat for AA130.
Chassis for AA130.
3 x Diffs for AL/AR110.
PTO off T98 Gearbox.
6 volt Lucas generator(unchecked)
PM for details. reasonable prices.Southern Highlands NSW. Dave
Tillotson carby & manifolds off a SD240 from AL160.
Carter carby & manifolds off a SD220 from AL110.
3 handbrake setups from T98 4 speed boxes.
Original horn from AS160, needs resistor wire.
Front I beam & axles off an AA130 with drums.
Rear Axles & diff housing off AA130 with drums.
Spider hubs & drums for AACO.
Windscreen for AA130.
Bench seat for AA130.
Chassis for AA130.
3 x Diffs for AL/AR110.
PTO off T98 Gearbox.
6 volt Lucas generator(unchecked)
PM for details. reasonable prices.Southern Highlands NSW. Dave
AL110 inter ute &&FC Holden Wagon&&HJ Holden 1 Tonner&&
Please Log in to join the conversation.
8 years 11 months ago #166109
by Jason130
Replied by Jason130 on topic International bits
Hi Dave ,do you still have AA130 chassis ?
Please Log in to join the conversation.
8 years 11 months ago #166252
by hayseed
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Replied by hayseed on topic International bits
Jason, Coupeute hasn't been on here for several Months.
I'd suggest sending Him a PM & hope he's ticked the box to receive Email notification of a PM...
I'd suggest sending Him a PM & hope he's ticked the box to receive Email notification of a PM...
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Please Log in to join the conversation.
Time to create page: 0.381 seconds