New member from Red Cliffs
10 years 8 months ago #142574
by bigcam
Replied by bigcam on topic Re: New member from Red Cliffs
Yep, a bloke down at Portland bought it about 3 months ago.
Please Log in to join the conversation.
10 years 8 months ago #142575
by Rusty54
Did you get what you were asking for it?
Hopefully he doesn't strap a surfboard to the roof, these utes need to be in the dry weather.......
Replied by Rusty54 on topic Re: New member from Red Cliffs
Yep, a bloke down at Portland bought it about 3 months ago.
Did you get what you were asking for it?
Hopefully he doesn't strap a surfboard to the roof, these utes need to be in the dry weather.......
Please Log in to join the conversation.
10 years 8 months ago #142576
by bigcam
Replied by bigcam on topic Re: New member from Red Cliffs
Was an older bloke, I'm pretty sure it'll be very well looked after.
First thing he did was take the wide rimes off it and put standard ones back on.
First thing he did was take the wide rimes off it and put standard ones back on.
Please Log in to join the conversation.
10 years 8 months ago #142577
by Rusty54
Ah, back to skinny 16's, 5" wide.......the bigger diameter rims do suit the old girls I think but it's nice to have more rubber on the road I think.
Mine will be running at least 7" wide original steelies with wide whites. The wheels will be made using two rims to make each wheel with one continuous weld as is allowed. Seven inch rims means I can run the biggest 16" wide white wall tyre at 235/75/16
Original looks with a fat tyre. Will be using american stainless steel dog dish hubcaps with the red painted centres as used on all Crestline models over there.
Should look pretty snazzy
Replied by Rusty54 on topic Re: New member from Red Cliffs
Was an older bloke, I'm pretty sure it'll be very well looked after.
First thing he did was take the wide rimes off it and put standard ones back on.
Ah, back to skinny 16's, 5" wide.......the bigger diameter rims do suit the old girls I think but it's nice to have more rubber on the road I think.
Mine will be running at least 7" wide original steelies with wide whites. The wheels will be made using two rims to make each wheel with one continuous weld as is allowed. Seven inch rims means I can run the biggest 16" wide white wall tyre at 235/75/16

Original looks with a fat tyre. Will be using american stainless steel dog dish hubcaps with the red painted centres as used on all Crestline models over there.
Should look pretty snazzy


Please Log in to join the conversation.
7 years 10 months ago #180618
by Rusty54
Replied by Rusty54 on topic Re: New member from Red Cliffs
Can't believe its been 3 years since these posts!!!!!
Still haven't finished the Mainline.......first paint job cracked up in a matter of months then got stuffed around with the next painter
Ute is about to be wired up
Still haven't finished the Mainline.......first paint job cracked up in a matter of months then got stuffed around with the next painter

Ute is about to be wired up

Please Log in to join the conversation.
Less
More
- Posts: 7327
- Thank you received: 6332
7 years 10 months ago #180643
by Mrsmackpaul
Your better to die trying than live on your knees begging
Replied by Mrsmackpaul on topic Re: New member from Red Cliffs
were do the years go ????
Your better to die trying than live on your knees begging
Please Log in to join the conversation.
4 years 8 months ago - 4 years 8 months ago #210725
by Rusty54
Replied by Rusty54 on topic New member from Red Cliffs
And another 3 years has passed.........
The Mainline is actually and realistically close to being finished and on the road.
As I write, the Red Gum boards for the tray are being finished and there are only the dash knobs to get refinished and the old valve radio to be installed
Though there are probably other little things I haven't thought of yet......
With regards to the chrome wheels in the picture, they are not staying on the car. I have widened original 16" rims in 6" front and 7" rear sizes with white wall (mega dollar) American Classic radials to be fitted.
The Mainline has been entered in this years Bay to Birdwood anniversary event in late September, in the concourse judging no less. My Dad and I have enjoyed many of these events over the past decade so it seemed a fitting debut for the old ute. We are also taking my parents' 1935 Ford Fordor, in black with Apple Green pin-striping and matching wire wheels, as per original.
Hopefully, the event is still on!! At this time there has been no correspondence to say it even might be cancelled or postponed, so fingers crossed.
Love to have a chat to anyone from the forum that might be attending as well!!
The Mainline is actually and realistically close to being finished and on the road.
As I write, the Red Gum boards for the tray are being finished and there are only the dash knobs to get refinished and the old valve radio to be installed

Though there are probably other little things I haven't thought of yet......
With regards to the chrome wheels in the picture, they are not staying on the car. I have widened original 16" rims in 6" front and 7" rear sizes with white wall (mega dollar) American Classic radials to be fitted.
The Mainline has been entered in this years Bay to Birdwood anniversary event in late September, in the concourse judging no less. My Dad and I have enjoyed many of these events over the past decade so it seemed a fitting debut for the old ute. We are also taking my parents' 1935 Ford Fordor, in black with Apple Green pin-striping and matching wire wheels, as per original.
Hopefully, the event is still on!! At this time there has been no correspondence to say it even might be cancelled or postponed, so fingers crossed.
Love to have a chat to anyone from the forum that might be attending as well!!
Last edit: 4 years 8 months ago by Rusty54. Reason: Grammar
Please Log in to join the conversation.
Less
More
- Posts: 7327
- Thank you received: 6332
4 years 8 months ago #210727
by Mrsmackpaul
Your better to die trying than live on your knees begging
Replied by Mrsmackpaul on topic New member from Red Cliffs
Almost there, like most things in life it takes a lot longer than most realize as we all have a life to live as well
Paul
Paul
Your better to die trying than live on your knees begging
Please Log in to join the conversation.
4 years 8 months ago #210745
by Sarge
Sarge
ACCO Owner, Atkinson dreamer.
Replied by Sarge on topic New member from Red Cliffs
Rusty, nice work, glad to see you pop in for your triannual visit. Keep us posted perhaps annually for a change.
Sarge

ACCO Owner, Atkinson dreamer.
Please Log in to join the conversation.
4 years 8 months ago #210746
by cobbadog
Cheers Cobba & Cobbarette
Coopernook, The Centre of our Universe
Working on more play time.
Replied by cobbadog on topic New member from Red Cliffs
How did you widen your rims? By using new wider rims and removing the old centres out of the ole rims and welding them into the new?
Cheers Cobba & Cobbarette
Coopernook, The Centre of our Universe
Working on more play time.
Please Log in to join the conversation.
Time to create page: 0.529 seconds