1962 Inter AA110.

Inter tappets always sound noisy as their gaps are big- especially compared to car motors. I was told if in doubt to leave the gap bigger rather than smaller as if they are too tight they burn valves. I have attached the specs for the silver diamond motor in case they help.

Cool thanks fellas. Will have to jump in and widen them a little. Didn't glue the rocker gasket so that will be fine!

Cheers!

Hey does anyone know the best place to get bailey channels for the aa110s? I know of fleetparts and scotts old auto rubbers.

Is it possible to buy dodge at4 seals? Are the cabs the same?

Found some rubber ones in clark rubber today that I will test fit and it might work on the sides and top but I will still need the chrome wiper type seals at the bottom of the window.

Also will be chasing quarter vent seals. Someone has had a bit of fun with a selastic gun on mine!!

Did you check Clark rubber for the bailey channel?, they do stock some.
Cheers Steve

Yeah found a couple. Gonna test fit and see how they go.

Hey there all!

I have managed to score some new parts for my dizzy on the 240. I am going to try and keep them as spares though as it was running well when I pulled it apart.

Does anyone have any advice on setting and cleaning the points? What spec do I set them to?

I haven't messed with dizzys before!

Any advice much appreciated!

This is a really good instruction for anyone trying to learn about home distributor servicing. It covers several different eras but gives really good step by step info on your old style.

what-when-how.com/auto-repair/servicing-...ributor-auto-repair/

Lang

Peter Jackson up at Gloucester will be able to help with all your rubbers for sure. www.oldera.com.au/

G'day Rossco,
I don't know if you're on Facebook but, if you are, check out our group for International AA, AB, C & D series.
Col

Rossco and Blackduck59 have you still got Inters in WA. Im in Bunbury and have an AS160 - which Im fitting an AGD240 tht i was given. I would like to find the part number for the valve collets and a parts manual for the AGD motor including, Valve spring/slo-rota valve roters/Valve caps,etc & Water Pump and other bits. I plan to fit the ASD220 Starter, Waterpump, manifolds, etc.

Also I am looking for colour photos of the Gold Engine please.
Hope you can help... Thanks