Welcome, Guest
Username: Password: Remember me

TOPIC: 1962 Inter AA110.

1962 Inter AA110. 16 Jun 2019 23:56 #201076

  • Blackduck59
  • Blackduck59's Avatar
  • Offline
  • Posts: 762
  • Thank you received: 182
WorkTruck,
Never had an Inter in the stable, just offered mechanical help if needed. Worked for Inters for a couple of years back in the dark ages.
I past through there fairly regular heading to Augusta.
Cheers Steve
The administrator has disabled public write access.

1962 Inter AA110. 17 Jun 2019 10:50 #201085

  • JOHN.K.
  • JOHN.K.'s Avatar
  • Offline
  • Posts: 1097
  • Thank you received: 186
Some of the motors have quieting ramps on the cams.......and its very east to end up with double the valve clearance if thats not realized.................Ive seen the motors with 050 clearance and rattling away,and very poor performance.................The early trucks front engine mount is under the waterpump....so there is no front mount on the crossmember......................do the AGD s have valve rotators?.............I would imagine the 264s might have ......they were a great motor............I dont think an early SD manifold will fit a tiltvalve engine.............incidentally,the TV head gasket is different to the earlier one,so the block is likely drilled different.
The administrator has disabled public write access.
Time to create page: 0.204 seconds

Historic Commercial Vehicles Club of Australia Inc.  Post: P.O. Box 2020 Bayswater Vic. 3153    Clubrooms: Unit 8 / 4  Macquarie Place Boronia    Club Phone: 0400 025 525    Club Rooms:  03) 9738 1558