Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: C1600 front axle

C1600 front axle 17 Feb 2020 08:00 #206651

  • projectinter
  • projectinter's Avatar Topic Author
  • Offline
  • Posts: 45
  • Thank you received: 1
Hi,

Does anyone know the spline count on c1600 4x4 front axle?

Pretty sure it’s a Dana 70.

Please Log in to join the conversation.

C1600 front axle 17 Feb 2020 14:24 #206672

  • JOHN.K.
  • JOHN.K.'s Avatar
  • Offline
  • Posts: 1442
  • Thank you received: 275
There are two different fronts,one has an IH centre,one is straight Spicer.....Ive had both apart many times ,remember little about them......However if its the outer for a FW hub,both would be the same ........By the way,the aftermarket FWH were no good at all ,as they were just Jeep units with a different hub flange.......The omly FWH any good were the Shute Upton ones made in Brisbane.

Please Log in to join the conversation.

C1600 front axle 17 Feb 2020 14:42 #206675

  • projectinter
  • projectinter's Avatar Topic Author
  • Offline
  • Posts: 45
  • Thank you received: 1
Thanks John,
There is a bloke selling free wheeling hubs on Facebook which are 19 spline.
Probably give it a miss. Might be more stuffing around than it’s worth.

Please Log in to join the conversation.

  • Page:
  • 1
Time to create page: 0.229 seconds

Historic Commercial Vehicles Club of Australia Inc.  Post: P.O. Box 2020 Bayswater Vic. 3153    Clubrooms: Unit 8 / 4  Macquarie Place Boronia    Club Phone: 0400 025 525    Club Rooms:  03) 9738 1558