Skip to main content

which way down

More
15 years 8 months ago #3335 by Sarge
which way down was created by Sarge
Some help please for a mate who is taking his N10 Bogie drive Volve to Brisbane up the Newell for the first time tomorrow. He wont be heavy (13 t container) but is concerned about the downhill. which way is easier, Cunninghams Gap or Toowoombah. too long ago for me to remember. :-[

Sarge B)
ACCO Owner, Atkinson dreamer.

Please Log in to join the conversation.

More
15 years 8 months ago #3336 by kennymopar
Replied by kennymopar on topic Re: which way down
cunninghams gap (just north of warick?) it a long way down goes for a few kms ..if hes worried id go the other route
cheers ken

Please Log in to join the conversation.

15 years 8 months ago #3337 by
Replied by on topic Re: which way down
Another way i been on and seen quite few semi's on the same road is off the New England Hwy btw Warwick and Toowoomba you take the road to Gatton nice steady drop on to the Warrego Hwy then into Brisbane. Best of luck Dave.

Please Log in to join the conversation.

More
15 years 8 months ago #3338 by Sarge
Replied by Sarge on topic Re: which way down
thanks for that, he lost brakes towing a 5th wheeler down out of Toowoomba a few years ago but has never done the gap hence his concern it might be as bad, Ii dont recall the gap being a big problem but that was a long time ago. :-/

Sarge B)
ACCO Owner, Atkinson dreamer.

Please Log in to join the conversation.

15 years 8 months ago #3339 by
Replied by on topic Re: which way down
It's a nice long drop and if you get into the right gear he should only have to touch the brakes lightly. Dave

Please Log in to join the conversation.

More
15 years 8 months ago #3340 by atkipete
Replied by atkipete on topic Re: which way down
Those older Volvos only had a pretty useless exhaust brake but if the service brakes are in good nick and you get right down in low range should be OK. Newer Volvo have an excellent engine brake, as good as a Jake but much quieter.

Please Log in to join the conversation.

Time to create page: 0.475 seconds