Skip to main content

Master Cylinder Cap

More
4 years 3 months ago #205844 by Coachboy
Master Cylinder Cap was created by Coachboy
Looking for an Alloy Master Cylinder cap to suit a 1968 F700 Ford.
Has the hexagon nut as part of the casting
Any help appreciated
Clive
68 Ford F700

Please Log in to join the conversation.

More
4 years 3 months ago #205863 by Lang
Replied by Lang on topic Master Cylinder Cap
Which Cap?

Please Log in to join the conversation.

More
4 years 3 months ago - 4 years 3 months ago #205868 by Rattail 1927
Replied by Rattail 1927 on topic Master Cylinder Cap
Hi Clive , if you can’t find one , I’m guessing here but they look like plumbers piping blankers,, good luck, also what engine is in your truck , a F 700 were the top of the range ?
I had a mate that had one and his had a 6V53 and a road ranger , hope you will find the cap , Jim
Last edit: 4 years 3 months ago by Rattail 1927. Reason: Spelling

Please Log in to join the conversation.

More
4 years 3 months ago #205903 by jon_d
Replied by jon_d on topic Master Cylinder Cap
No eBay APP ID and/or Cert ID defined in Kunena configurationLooks like they will ship to Oz.

Using the part numbers above.

?

Please Log in to join the conversation.

More
4 years 3 months ago #205906 by Dodgeydude
Replied by Dodgeydude on topic Master Cylinder Cap
be careful about using plumbing fittings, the originals have a breather circuit, see the little holes in the diagrams
Many useful things fall off trucks

Please Log in to join the conversation.

More
4 years 3 months ago #205912 by Coachboy
Replied by Coachboy on topic Master Cylinder Cap
Thanks for the help.
From the catalogue picture it looks like the F16500 is the one I need
Think I may have come across one, just waiting to confirm
68 Ford F700

Please Log in to join the conversation.

Time to create page: 0.538 seconds