Skip to main content

farmall m tyres

More
8 years 2 months ago #167504 by Oldengines
farmall m tyres was created by Oldengines
hi guys,
i have a couple of farmall m tractors, one of which i would like to restore, does any one know of any 13.50x32 tyres
hidden away somewhere or a pair of rear steel wheels to suit, or is there any way to convert to a differant size tyre
but keepint the same height?, any help appreciated, i am located in Katanning W.A., cheers for now,
Chester.

Please Log in to join the conversation.

More
8 years 2 months ago #167507 by Tacho
Replied by Tacho on topic farmall m tyres
Oldengines I understand that tyre size is no longer commercially available.
There was a bloke in the eastern states trying to get enough orders together to get some made, but that was a while ago and I haven't heard anything about it recently. Someone on here may know more, but an add in TOMM magazine should help find some.

Geoff
The following user(s) said Thank You: Oldengines

Please Log in to join the conversation.

More
8 years 2 months ago #167508 by MasseyHarris55
Replied by MasseyHarris55 on topic farmall m tyres
Winchestergoose I presume leave it with me I might be able to help you.

Fixing things one big shifter at a time

Please Log in to join the conversation.

More
8 years 2 months ago #167511 by Oldengines
Replied by Oldengines on topic farmall m tyres
no, you have me mixed up, Winchestergoose is in Albany, i am the guy from Katanning, you had a look at my shed
when the trachmach agm was held in town.
i would be happy with a pair of steel wheels, cheers,
Chester.

Please Log in to join the conversation.

More
8 years 2 months ago #167520 by MasseyHarris55
Replied by MasseyHarris55 on topic farmall m tyres
No you are quite right you are not he still leave it with me though

Fixing things one big shifter at a time
The following user(s) said Thank You: Oldengines

Please Log in to join the conversation.

More
8 years 2 months ago #167619 by SWR
Replied by SWR on topic farmall m tyres
I don't know about the goose thing but the 13:50 - 32 are like hens teeth to obtain I waited a couple of years & lots of searching before I found them, but I did find the Farmall M had a 38" wheel/tyre combo which is much more commonly found over eastern states.(hope that may help)
Cheers SWR
The following user(s) said Thank You: Oldengines

Please Log in to join the conversation.

More
8 years 2 months ago - 8 years 2 months ago #167669 by ozfarm
Replied by ozfarm on topic farmall m tyres
12.4 x 32 is available
minion has a pair rolling up for a wk40 will be interesting to see how they go instead of the 13.5

harvest was the last producer of the 13.5 x 32 and they have stopped so if u go looking for rocking horsie doo doo :P you will have more success
Last edit: 8 years 2 months ago by ozfarm.
The following user(s) said Thank You: SWR

Please Log in to join the conversation.

More
8 years 2 months ago #167679 by Oldengines
Replied by Oldengines on topic farmall m tyres
the 12.4s width would be ok, but i presume they would be a smaller diameter,
it would make the tractor look like it is sitting down?

Please Log in to join the conversation.

More
8 years 2 months ago #167681 by ozfarm
Replied by ozfarm on topic farmall m tyres
will take some pictures when minion gets them mounted on his wk40

he figures smaller tyre is better than no tyre at all :P

Please Log in to join the conversation.

More
8 years 2 months ago - 8 years 2 months ago #167685 by Mairjimmy
Replied by Mairjimmy on topic farmall m tyres
Here are 12.4.32 that I put on the hr5 a few years ago because somethig is better than nothing, it's maybe 6" lower at the back now, the 13's filled the gaurd right up and they are a lot narrower.



Colin

PS the hat and overall are there to keep the black oil and stuff off me, I remember at the National rally at Naracoorte SA this woman with a white top got too close and with black spots on her top she wandered off none the wiser[ well I wasn't game to tell her]

Time to get up andd get going.......todays bad decisions aren't going to make themselves!!!
Last edit: 8 years 2 months ago by Mairjimmy. Reason: To add
The following user(s) said Thank You: Oldengines, Tacho

Please Log in to join the conversation.

Time to create page: 0.474 seconds