- Posts: 32
- Thank you received: 0
D1310 4 x 4 Progress
10 years 11 months ago #119169
by Cocky
Replied by Cocky on topic Re: D1310 4 x 4 Progress
Spinnerboy, I noticed there is no bellhousing clutch lever boot fitted yet. Do you have one? If not I happen to have a brand spanker I'm willing to donate to what is shaping up to be a mickey mouse resto.
Cocky
Cocky
Please Log in to join the conversation.
Less
More
- Posts: 7
- Thank you received: 0
10 years 9 months ago #119170
by richard562red
Replied by richard562red on topic Re: D1310 4 x 4 Progress
Hi I've got a D1310 4x4 van that I'm about to start restoration what your doing is an inspiration,
Please Log in to join the conversation.
10 years 9 months ago #119171
by Andy Wright
Andy&&&&Whatever rubs your buddah.&&&&Got Bedfords? http://bedfordtr
Replied by Andy Wright on topic Re: D1310 4 x 4 Progress
Very, very nice, Spinner. Any tricks or problems you've overcome that would be good advice to others?
Andy&&&&Whatever rubs your buddah.&&&&Got Bedfords? http://bedfordtr
Please Log in to join the conversation.
- spinnerboy
- Topic Author
- Offline
Less
More
- Posts: 228
- Thank you received: 10
10 years 9 months ago #119172
by spinnerboy
Replied by spinnerboy on topic Re: D1310 4 x 4 Progress
Andy, nothing major, seals & bearings etc still available from bearing suppliers, the king pin shims and the wipers for the balls on the end of the front diff I got from an IHC guy in USA. It didnt have the original wheels, just a cheap set of made in taiwan Sunraysia copies that were cracked 'n rusted, ended up using F350 rims. Wheel cylinders still available new ( pretty sure also same as F350), all the spring bushes 'n pins thru Wagga Tractors.
Please Log in to join the conversation.
Time to create page: 0.415 seconds