- Posts: 108
- Thank you received: 0
1978 K125cr Prime Mover (unfinished project)
- HEOFTHEHUM
- Topic Author
- Offline
Less
More
9 years 10 months ago #144647
by HEOFTHEHUM
1978 K125cr Prime Mover (unfinished project) was created by HEOFTHEHUM
I am selling my K125,Turn Key Driver, it has DS400 Eatons,3.9 ratio,on 11 spring REYCO, RT9509 Roadranger, Cummins 290 with rising rate pump aneroid,3003708-RX high mount Turbo, 3 stage Jakes, Jost J37c Turntable setup,12 new 11r22.5 drive tyres, 8 new drive rims, 2 powdercoated,Steers are 295/80 on 9"ROADKING Wheels, 12.5 ton front axle, 63.540 ton factory rate.Full set of New Drive Brake Boosters and lines,drums and linings are like new,Eldorado VIP drivers seat,New Genuine HELLA Kenworth Lightbar,PLUS a lot of other stuff I will list.Open to Reasonable offers!
Truck is in undercoat,paint is supplied.
I will post photos and a list more stuff over the next, health permitting, PLEASE dont hassle me for them, I have to sell it owing to medical conditions.
Please feel free to call me during the day 0412-946-561 or 07-46911533 silent. Thx Ray
Truck is in undercoat,paint is supplied.
I will post photos and a list more stuff over the next, health permitting, PLEASE dont hassle me for them, I have to sell it owing to medical conditions.
Please feel free to call me during the day 0412-946-561 or 07-46911533 silent. Thx Ray
Please Log in to join the conversation.
- HEOFTHEHUM
- Topic Author
- Offline
Less
More
- Posts: 108
- Thank you received: 0
9 years 10 months ago #144648
by HEOFTHEHUM
Replied by HEOFTHEHUM on topic Re: 1978 K125cr Prime Mover (unfinished project)
Forgot to add CHASSIS painted Kenworth Red and NEW Stemcos fitted to front axle.
Please Log in to join the conversation.
Time to create page: 0.389 seconds