Cummins C Series Flywheel/Clutch

Looking for a Cummins C series Flywheel and pressure plate/clutch its to go on an ISC but a CT8.3, CTA8.3 etc will work as well.

I have 2 different flexplates for autos for these motors if that is of any interest.

0418 708 566 (just north of Bris)

Matt

Where have you tried mate?
I've got a couple of Ideas, but I suspect you've already checked them out...

Sorry Hayseed - been away from computer.

I have just tried word of mouth at present. I did buy some other some stuff off "all diesels" at Nerang and they were saying that they dont have any - evidently the motors from the USA mainly come as autos..

They did offer me new flywheel at about $600 (plus pressure plate) but I was hoping that someone doing a motor home might have had one (swapping a manual to an auto).

I was chasing a c series injector pump a while ago and enquired then (people with wrecked motors) but it seemed they thought they were made of Gold.

Just had a trawl through your old Posts & worked out you're in Brisbane.
So I'd suggest either Cummins who have a used parts section, Or a mob (in Brisabane) called Torque power who Specialise in all things Cummins. Failing that try every wrecking yard you can find/think of..
We also have an active Member here Who knows his Cummin's. I'm sure if he is able help you, he will chime in..

Sorry about not giving my location

Just tried Cummins used - and they didnt have a specific price but mumbled something about $800

Will try TorquePower

I might try Maquarie

I am not in a hurry, its probably 2 months down track so was hoping for the someone has it lying around approach

Are you still looking around for the manual flywheel clutch etc? Please let me know.

I think the flywheel housing may be different if changing from auto to manual.

Regards
Camma

I think the housings are the same (SAE#2), actually I am using a ISC housing that came for the auto on my CT8.3 motor (with a SMOT Eaton behind).

Just had problems trying to find a 24V starter (the ISC is from a Sterling and had the small nose on the starter - ended up one off the old MAN fitted - weird that a 1970 Man starter would fit the 2003 ISC).

Still looking for the flywheel and pressure plate.

Just saw this post.
My dad may have the bits you need.
PM me with what parts you need.

Hi wannawagon, have you got the feul pump yet, I know where there is a 6ct p7100 pump if you still need I will make some enquires ,,,, let me know
Do you know if the pump p7100 of a 6ct will fit a 6BT