- Posts: 3
- Thank you received: 0
dodge and inter bits
12 years 3 months ago #72955
by gold1
dodge and inter bits was created by gold1
does any one have a front wheel stud & nut for an inter 510A acco 1975 or a rear wheel bearing hub for a dodge D5N 400
Please Log in to join the conversation.
12 years 3 months ago #72956
by tonym
If you can't afford a Dodge
Replied by tonym on topic Re: dodge and inter bits
What diff is in the rear? I have a Dana 60 dual wheel diff not doing anything.
Can you give a description of the front stud required? I also have front hubs to suit an IH c1600.
Can you give a description of the front stud required? I also have front hubs to suit an IH c1600.
If you can't afford a Dodge
Please Log in to join the conversation.
12 years 3 months ago #72957
by bund126
Replied by bund126 on topic Re: dodge and inter bits
I'm also after a front wheel stud and nut for a 510a
if you find some let me know
thanks
if you find some let me know
thanks
Please Log in to join the conversation.
12 years 3 months ago #72958
by gold1
Replied by gold1 on topic Re: dodge and inter bits
I am not shore what diff it is . it has 5 studs with 16 inch rims as standard. I will try to find out.
the inter wheel stud is 80 millimeters long total with a flange in the middle and one side nut holds the stud to the back plate the other side is the wheel nut and its a right hand thread.
the inter wheel stud is 80 millimeters long total with a flange in the middle and one side nut holds the stud to the back plate the other side is the wheel nut and its a right hand thread.
Please Log in to join the conversation.
12 years 3 months ago #72959
by Bruce99
***********&&---Bruce99---&&***********
Replied by Bruce99 on topic Re: dodge and inter bits
Try looking at a Nissan Civilian or Caball front wheel studs as they look similar but I'm not sure.
***********&&---Bruce99---&&***********
Please Log in to join the conversation.
Time to create page: 0.383 seconds