- Posts: 1303
- Thank you received: 1192
Q:? Time
Less
More
8 years 7 months ago #162736
by Southbound
I'd rather have tools that I don't need, than not have the tools I do need.
Replied by Southbound on topic Re: Q:? Time
Question #4
What does AF stand for on a spanner?
What does AF stand for on a spanner?
I'd rather have tools that I don't need, than not have the tools I do need.
Please Log in to join the conversation.
8 years 7 months ago #162737
by hayseed
Across Flats.
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Replied by hayseed on topic Re: Q:? Time
Question #4
What does AF stand for on a spanner?
Across Flats.
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Please Log in to join the conversation.
8 years 7 months ago #162738
by Swishy
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Replied by Swishy on topic Re: Q:? Time
Q:#5 Wot duz VOLVO stand for ??
cya
cya
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Please Log in to join the conversation.
8 years 7 months ago #162739
by overnite
American fine ( as in fine thread, as opposed to Pommy coarse thread Whitworth)
Replied by overnite on topic Re: Q:? Time
Question #4
What does AF stand for on a spanner?
Across Flats.
American fine ( as in fine thread, as opposed to Pommy coarse thread Whitworth)
Please Log in to join the conversation.
8 years 7 months ago #162740
by hayseed
FWIW.
www.baconsdozen.co.uk/tools/conversion%20charts.htm
A.F means Across Flats, and indicates the distance apart the jaws are on an open end wrench (or the parallel sides on a nut or bolt. Usually applied to spanners in imerial (inch based) sizes the smallest increments are normally 1/16 inch (for example 7/16,1/2,9/16 etc) but some smaller spanners are marked in 1/32 inch increments.Very rarely af spanners are marked in decimal instead of fractional sizes for example .50 instead of 1/2 or .75 instead of 3/4 inch etc.Imperial AF spanners are normally used on nuts and bolts threaded UNC or UNF (Unified Coarse or Unified Fine) and use a thread angle of 60 degrees.This standard was introduced as the 'new' standard around the 1940s to replace BSW and BSF etc and was supposedly phased out by the 1970's in favour of metric threads and sizes. However like whitworth and BSF,AF it is still encountered in specialised applications and many car and motorbike makers carried on using imperial fittings etc for a long time after they became supposedly obsolete. It is very common to find an older car or bike that left its maker with a mixture of imperial and metric nuts and bolts holding it together. Land Rover and other smaller,specialised car makers used a mixture of imperial fittings into the 1990's.Note also that AF allen or hex keys fit BSW or BSF hex headed socket screws.
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Replied by hayseed on topic Re: Q:? Time
Question #4
What does AF stand for on a spanner?
Across Flats.
American fine ( as in fine thread, as opposed to Pommy coarse thread Whitworth)
FWIW.
www.baconsdozen.co.uk/tools/conversion%20charts.htm
A.F means Across Flats, and indicates the distance apart the jaws are on an open end wrench (or the parallel sides on a nut or bolt. Usually applied to spanners in imerial (inch based) sizes the smallest increments are normally 1/16 inch (for example 7/16,1/2,9/16 etc) but some smaller spanners are marked in 1/32 inch increments.Very rarely af spanners are marked in decimal instead of fractional sizes for example .50 instead of 1/2 or .75 instead of 3/4 inch etc.Imperial AF spanners are normally used on nuts and bolts threaded UNC or UNF (Unified Coarse or Unified Fine) and use a thread angle of 60 degrees.This standard was introduced as the 'new' standard around the 1940s to replace BSW and BSF etc and was supposedly phased out by the 1970's in favour of metric threads and sizes. However like whitworth and BSF,AF it is still encountered in specialised applications and many car and motorbike makers carried on using imperial fittings etc for a long time after they became supposedly obsolete. It is very common to find an older car or bike that left its maker with a mixture of imperial and metric nuts and bolts holding it together. Land Rover and other smaller,specialised car makers used a mixture of imperial fittings into the 1990's.Note also that AF allen or hex keys fit BSW or BSF hex headed socket screws.
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Please Log in to join the conversation.
8 years 7 months ago - 8 years 7 months ago #162741
by Wilweld
'79 F100- 302c 4spd&&'81 F350- Isuzu 6BB1&&Chamberlain Industrial MK11 (6G)
Replied by Wilweld on topic Re: Q:? Time
[/quote]
FWIW.
www.baconsdozen.co.uk/tools/conversion%20charts.htm
A.F means Across Flats, and indicates the distance apart the jaws are on an open end wrench (or the parallel sides on a nut or bolt. Usually applied to spanners in imerial (inch based) sizes the smallest increments are normally 1/16 inch (for example 7/16,1/2,9/16 etc) but some smaller spanners are marked in 1/32 inch increments.Very rarely af spanners are marked in decimal instead of fractional sizes for example .50 instead of 1/2 or .75 instead of 3/4 inch etc.Imperial AF spanners are normally used on nuts and bolts threaded UNC or UNF (Unified Coarse or Unified Fine) and use a thread angle of 60 degrees.This standard was introduced as the 'new' standard around the 1940s to replace BSW and BSF etc and was supposedly phased out by the 1970's in favour of metric threads and sizes. However like whitworth and BSF,AF it is still encountered in specialised applications and many car and motorbike makers carried on using imperial fittings etc for a long time after they became supposedly obsolete. It is very common to find an older car or bike that left its maker with a mixture of imperial and metric nuts and bolts holding it together. Land Rover and other smaller,specialised car makers used a mixture of imperial fittings into the 1990's.Note also that AF allen or hex keys fit BSW or BSF hex headed socket screws.
[/quote]
****
To add to that, spanners made to fit whitworth bolts are not marked as AF, but are sized according to the thread size of the bolt. So a spanner marked 5/16W fits a whitworth bolt with a thread size of 5/16" and is similar in size to a 5/8AF.
Then they changed all the withworth head sizes during WW2, making them one size smaller to save material. Meaning a 5/16W spanner now fits 3/8 BSW/BSF.
Hence the reason they invented the shfting spanner
Grant.
FWIW.
www.baconsdozen.co.uk/tools/conversion%20charts.htm
A.F means Across Flats, and indicates the distance apart the jaws are on an open end wrench (or the parallel sides on a nut or bolt. Usually applied to spanners in imerial (inch based) sizes the smallest increments are normally 1/16 inch (for example 7/16,1/2,9/16 etc) but some smaller spanners are marked in 1/32 inch increments.Very rarely af spanners are marked in decimal instead of fractional sizes for example .50 instead of 1/2 or .75 instead of 3/4 inch etc.Imperial AF spanners are normally used on nuts and bolts threaded UNC or UNF (Unified Coarse or Unified Fine) and use a thread angle of 60 degrees.This standard was introduced as the 'new' standard around the 1940s to replace BSW and BSF etc and was supposedly phased out by the 1970's in favour of metric threads and sizes. However like whitworth and BSF,AF it is still encountered in specialised applications and many car and motorbike makers carried on using imperial fittings etc for a long time after they became supposedly obsolete. It is very common to find an older car or bike that left its maker with a mixture of imperial and metric nuts and bolts holding it together. Land Rover and other smaller,specialised car makers used a mixture of imperial fittings into the 1990's.Note also that AF allen or hex keys fit BSW or BSF hex headed socket screws.
[/quote]
****
To add to that, spanners made to fit whitworth bolts are not marked as AF, but are sized according to the thread size of the bolt. So a spanner marked 5/16W fits a whitworth bolt with a thread size of 5/16" and is similar in size to a 5/8AF.
Then they changed all the withworth head sizes during WW2, making them one size smaller to save material. Meaning a 5/16W spanner now fits 3/8 BSW/BSF.
Hence the reason they invented the shfting spanner
Grant.
'79 F100- 302c 4spd&&'81 F350- Isuzu 6BB1&&Chamberlain Industrial MK11 (6G)
Last edit: 8 years 7 months ago by Wilweld.
Please Log in to join the conversation.
8 years 7 months ago #162742
by rex
Making a small effort to save the history of road transport in Australia by being in front of Simms
Replied by rex on topic Re: Q:? Time
Question 5
EXCELLENCE
Rex
EXCELLENCE
Rex
Making a small effort to save the history of road transport in Australia by being in front of Simms
Please Log in to join the conversation.
8 years 7 months ago - 8 years 7 months ago #162743
by Swishy
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Replied by Swishy on topic Re: Q:? Time
Rex
M80
Sorry rong again
Q:#5 Wot duz VOLVO stand for ??
Not much
Not much @ all
Q:#6 Wot Duz KENWORTH stand for?
LOL
cya
M80
Sorry rong again
Q:#5 Wot duz VOLVO stand for ??
Not much
Not much @ all
Q:#6 Wot Duz KENWORTH stand for?
LOL
cya
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Last edit: 8 years 7 months ago by Swishy.
Please Log in to join the conversation.
Less
More
- Posts: 1303
- Thank you received: 1192
8 years 7 months ago - 8 years 7 months ago #162744
by Southbound
Volvo means "I roll" in Latin
I'd rather have tools that I don't need, than not have the tools I do need.
Replied by Southbound on topic Re: Q:? Time
Q:#5 Wot duz VOLVO stand for ??
cya
Volvo means "I roll" in Latin
I'd rather have tools that I don't need, than not have the tools I do need.
Last edit: 8 years 7 months ago by Southbound.
Please Log in to join the conversation.
8 years 7 months ago #162745
by Swishy
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Replied by Swishy on topic Re: Q:? Time
R I G H T
LOL
'V'Bus drivers logo
http://t3.gstatic.com/images?q=tbn:ANd9GcRn2-QHa4IDDGkJdw0fSYfBG94sHbvQrjKW0vIgK2G48eCzEQ89
cya
LOL
'V'Bus drivers logo
http://t3.gstatic.com/images?q=tbn:ANd9GcRn2-QHa4IDDGkJdw0fSYfBG94sHbvQrjKW0vIgK2G48eCzEQ89
cya
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Please Log in to join the conversation.
Time to create page: 0.527 seconds