- Posts: 1585
- Thank you received: 841
QUESTION TIME
.
.I am..........with seed on that.............
if you know you are only going back one slot...........instead of dropping the button.........
slip the stick around the corner.............
If you then want to go down further ,drop the button and go back two slots..........
would that be right.....................??????
................................Billy.............................
I CAME INTO THIS WORLD WITH NOTHING & STILL HAVE MOST OF IT.........................
I used to be a truck driver,
but i am now not a truck driver ,
on a good day i can remember
that i used to be a truck driver.
Please Log in to join the conversation.
hayseed wrote:
werkhorse wrote: Coz apparently the bearings aren't strong enough in that gear for the loads imposed.... And I believe there is a lubrication problem in that gear too...
... Or so I've been told
Not too sure about that Werk.. as there is only 4 bearings in the front 1/2 of a Roadranger (2 on each countershaft) I can't see how It would put anymore load on the bearings than being in any other gear. BISTBC
Silly low (As I call It) can be handy if your running out of Momentum at an intersection/roundabout & need to grab a "quick" gear.As you can do It a a bit smoother & quicker than a full compound shift...
Or so I've heard..LOL
Well Seed.... I have heard... That it's to do with the back section more so than the main section.... Really don't know why though as I've seen inside a few over the years....
You might Laugh at me because I'm different, I laugh at you because you're all the same
Please Log in to join the conversation.
werkhorse wrote:
Well Seed.... I have heard... That it's to do with the back section more so than the main section.... Really don't know why though as I've seen inside a few over the years....
I don't Know why either, Werk
& every Time I've had one in Bits, was always in Too big of a hurry to get it back out on the Road to sit down & ponder the "secret".....LOL
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Please Log in to join the conversation.
Turntable release should they be on the off side to the traffic as too landing legs??????
Please Log in to join the conversation.
Govt Workers yes ............... passengers side
Private owner op n drivers .......Drivers side
cya
ยง
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Please Log in to join the conversation.
Please Log in to join the conversation.
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Please Log in to join the conversation.
How many miles / hours
duz it take to time the independant air operated wipers on your Bloverd beast
OR
Aint it gunna happn
Cya
ยง
OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST
There's more WORTH in KENWORTH
Please Log in to join the conversation.
- Posts: 1585
- Thank you received: 841
..............................Billy.............................
I CAME INTO THIS WORLD WITH NOTHING & STILL HAVE MOST OF IT.........................
I used to be a truck driver,
but i am now not a truck driver ,
on a good day i can remember
that i used to be a truck driver.
Please Log in to join the conversation.
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Please Log in to join the conversation.