Rebuild of AT4114

Quick update I've etch primed the front guards and the LH door fingers crossed tomorrow weather permitting I will etch the drivers door I started to strip the paint of the nose cone and it's very ugly full of inch thick body filler and it's beyond my basic panel skills so I was given a spare I've welded up some small cracks in the panel and striped it of paint and it appears to be in nice condition the only problem is it has no cut outs for the bumper bar brackets so I will cut them in this panel has probably been on a large 700 series but I'll make it work cheers Bryant

http://i.imgur.com/KLZK8n1.jpg?1
http://i.imgur.com/XyF09RG.jpg?1
http://i.imgur.com/a5q79Nt.jpg?1
http://i.imgur.com/Kynwz9S.jpg?1
http://i.imgur.com/ceOMwMA.jpg?1

Enjoying this, keep it up. You'll be there before you know it.
Nice working weather, now.

Cheers, Jarrod.

Small up date started striping the paint of the inner guards and striped the old tar finish from the back of them and the tar on the back side of the front guards and have given them a coat of penatrol ready for a top coat of black epoxy

http://i.imgur.com/SRFbONJ.jpg?1
http://i.imgur.com/M1FBGbo.jpg?1
http://i.imgur.com/j1IUdIW.jpg?1
http://i.imgur.com/RZyV3rq.jpg?1

Thanks for the comments jarrod the weather this week looks to be not real good for playing trucks cheers Bryant

I've spent some time on the radiator support panel today I've got 3 of these the original looked like it had been in a demolition darby the second had rust issues and lucky last needed some repairs to the bottom rail as it was badly cracked so I welded it up as wel as a few hairline cracks in random places and have knocked out a few small dents after this panel is done I've only got the bonnet to go cheers Bryant

http://i.imgur.com/MTgvGFP.jpg?1
http://i.imgur.com/fkvbyFX.jpg?1
http://i.imgur.com/fZAF8wi.jpg?1

She's going to look really good keep up the good work AT4

More progress today

http://i.imgur.com/zfk1i3x.jpg?1
http://i.imgur.com/eDcH3rK.jpg?1
http://i.imgur.com/87IT0N4.jpg?1
http://i.imgur.com/btjW3X1.jpg?1

Ok thought I'd post an update the body was taken down to a good mates workshop were he applied 3 coats of 2k high fill primer then it was guide coated and I spent a few hours wet sanding with 600 paper the next morning it was given 4 coats of gray 2k color and the body was bolted back on the chassis today it's now starting to look like a dodge again cheers Bryant

http://i.imgur.com/l3ILWpk.jpg?1
http://i.imgur.com/C4AX2co.jpg?1
http://i.imgur.com/pYV7vRR.jpg?1
http://i.imgur.com/4k3wB5I.jpg?1
http://i.imgur.com/Yg3yWjl.jpg?1
http://i.imgur.com/lE7roLG.jpg?1

Ooooooohhhhhh......

very nice.

Jarrod.

looking really good mate.