Skip to main content

Golden Oldies Truck Show Dubbo 9th August 2014

More
9 years 11 months ago #113361 by v8 inter nut
Ive got nothing ready to go yet :o but I figure I will leave it to the last minute and hope it all comes together 8-)

Please Log in to join the conversation.

More
9 years 11 months ago #113362 by modela2010
Best of luck V8. Looking forward to the toys you bring up to share.

Please Log in to join the conversation.

More
9 years 11 months ago #113363 by gilly
Well ModelA,
It started today, major rebuild for the Dodge, parts have arrived, the big squirters in stock, keep a look out, hoping to have the red machine back on the road for Dubbo!! :-/
[IMG


The Guru at Interland is on the job, he just loves these v6 cummins engines he tells me ;)

[IMG

Now I know he is colour blind :o
Gilly

Please Log in to join the conversation.

More
9 years 11 months ago #113364 by GRINNIN BIG
Hope ya didn't break it Gilly, See you two there !
BG

Please Log in to join the conversation.

More
9 years 11 months ago #113365 by geoffb
Chocs
Are looking for that miss ?? reckon its in the second shelf of tool box
But noticing from the shape and colour of that you also understand the finer things in life ;D ;D ;D

Please Log in to join the conversation.

More
9 years 11 months ago #113366 by modela2010
Looks as though things are happening fast at Interland as the Chocs is only a blur! ;) ;)

Please Log in to join the conversation.

More
9 years 11 months ago #113367 by gilly
The dubbo dash is on for this one, just having trouble finding the inlet valves, that must be where the miss is browny, no wonder she was a liitle hard to start, dropping the sump next to see if the remains of the intake valves are there, 6cyl x 2 valves per pot = 12. :-/
Stand by, over.
Gilly

Please Log in to join the conversation.

More
9 years 11 months ago #113368 by AERODYNE
Hi all , a lot less pressure this time to make it to the Dubbo show , a heap of us are going friday morning see you there.
Cheers Chappo

Please Log in to join the conversation.

More
9 years 11 months ago #113369 by newto
I see from the pics that Chocs has got the hammer and pry bar out.....soooooo....
obviously the hammer is to put the main caps back in place with tlc......and....
the pry bar is to set the precise injector heights???? and valve gaps???
i'm green with envy.........(not!)
newto

Please Log in to join the conversation.

More
9 years 10 months ago #113370 by modela2010
Hi Gilly,

Mate, my V6 is same colour as yours, Maybe your Cummins has the wrong colour!! ;) ;) In regard to extra valves, my engine has 4 valves per pot so maybe I could take one out of each cylinder and send them down to you. ;) ;)

Please Log in to join the conversation.

Time to create page: 0.487 seconds