Inter AR 110

Gidday Cam,
How did you end up with cab rubber replacements, I have just started googling and found a few suppliers.
Would be good to find a complete set, did see a US one but didn't write it down and can't find it again.

Hi Raggsie, I just pulled the windscreens and back windows out of mine and painted around where the rubbers go. The Rubbers on mine are absolutly US. I've got the glass man cutting me new laminated windscreens and back windows and putting them in with non gunuine rubber for $650 which has sorted out that problem.

Coupeute would be the one to ask about the rubbers I'd guess.

I put a clear over the top of it all on the weekend and sprayed about 3l of fishoil into the cab today. I smell like the cats breakfast. I found the engine and chassis numbers where you all told me to look, the chassis number was actually in quite large letters.

Raggsie, not sure if these are the same but I reckon they would be.
travelallparts.com/products/?level_2_category=320
I've got the shackle rubbers comming from the same mob. I'll let you know how good the delivery is, I ordered them on Friday.

Thanks Cam,
I was just looking for an easy way out, but 90 % of it is probably common stuff.
I deal with a pretty good windscreen bloke so I best check him out.
Rear ones are that dry the glass is rattling but screen seems ok, everything else is buggered or missing,seems to be common for these models.
I should compile a list as I go could be handy for future.

Arrr yeer, gday Rabbsie, Lorry Builder ere..
Arrr dont wurry about all that fancy rubber an stuff.
Just get yaself down to Bundings or Meter 10 and get yaself a bluddy grate tube of black Siwastik!
Just wound up all the windas and start squirtin it on..
Sum blokes rkn usin massking tape, but it sticks on buy itself ok.
Righto give that a go.
Ya wont look back, or out..

good on me

LB

The rubbers aren't like the modern ones. The reason my glass man is cutting me new glass is that the windows are too big to fit with modern rubbers. I think the glass might be larger than the opening, the glass actually sits behind the opening, not like the new ones were it is surrounded by the rubber. BParo might have a few clues as well, he did up his 160 a couple of years ago.

Arr Lorry Builder ere agen Rabbsy
if ya trowel off the surplus Siwastik a bit neat
itll be like window tint ok

righto

good on me

LB

Your rubbers might be different to the ones that I used in my truck Raggsie, but I got mine from Andrew Heywood at this mob www.rarespares.net.au/rsp/industrial/dis...utors/webs/Adelaide/ . I found they were great to deal with and their prices were reasonable too. They seem to have quite a large product range. I have bought various pieces from USA but still find it easier buying stuff from here within Oz.

Desotodav

Shackle rubbers turned up today, about 10 days after I ordered them from Travalall Parts, more than a bit better than Scotts as well as cheaper including the freight.

Cam

And they wonder why so much is on line from overseas

Trevor