- Posts: 40
- Thank you received: 0
Eaton 2 speed axle motor Where?
Please Log in to join the conversation.
- Posts: 44
- Thank you received: 0
Avoid the dream takers.&&&&Restored 42' KS5&&c1100 5.0 TH700&&K1 on
Please Log in to join the conversation.
It's for an 1800 ACCO in Bris
Cheers,
Tony.
Please Log in to join the conversation.
- Posts: 1302
- Thank you received: 1191
2 tips on two speeds
Have two shift motors, one on the diff working, and one on the bench being rebuilt for next time.
Second, never let a paid driver near one!!!
I'd rather have tools that I don't need, than not have the tools I do need.
Please Log in to join the conversation.
I had a No 4 two speed (1830B) many years ago, and bought parts from auto electricians $$$, and then from car parts shops. IIRC they were ECLIN brand. Buried in my shed are a set of points and a 'monkey on a stick'.
2 tips on two speeds
Have two shift motors, one on the diff working, and one on the bench being rebuilt for next time.
Second, never let a paid driver near one!!!
Thanks Southbound.
I get your drift, "Never let a paid driver near one". I never had any problem with the ACCO I drove for my boss (now ex boss). I owned an AB180 (AB182) and rarely drove it myself -- no probs with box or 2 speed diff. The only probs was too small engine and hopeless brakes. Luckily, I had good brakes on the trailer. I used it to move a 12 ton drott with 9 tons on the trailer and 3 tons transferred to the truck. My later truck, with good diesel grunt and full air brakes, gave me more driving confidence and safety.
Back to the post:
Weren't all the 2 speed shift mechs the same in those days? Even the Rockwell 7 Eaton the same and interchangeable?
BTW, this jigger was bought yesterday and will also be driven by a "paid driver" :'(.
Cheers,
Tony
Please Log in to join the conversation.
- Posts: 44
- Thank you received: 0
Avoid the dream takers.&&&&Restored 42' KS5&&c1100 5.0 TH700&&K1 on
Please Log in to join the conversation.
These come up on EBay regularly....last one I saw about a month ago went for $130.00
Daz
Please Log in to join the conversation.
Hi Tony, Mines off an AB160. If you think it will fit I can go and dig it up.
Thanks intman.
I'll try to find out so you may not have to "dig" for nothing.
Tony
Please Log in to join the conversation.
These come up on EBay regularly....last one I saw about a month ago went for $130.00
Daz
Thanks Daz.
$130 not too bad. Now wait but don't have much time.
I came across a guy on eBay who had some inter parts and dumped 2 axles coz he had to move and nobody wanted them.
Tony
Please Log in to join the conversation.
Having lived through a pandemic I now understand all the painting of fat people on couches!
Please Log in to join the conversation.