Skip to main content

Weight of HMF A66 K2 truck Crane

More
13 years 5 months ago #39204 by ianoz
Looking at maybe putting the volvo on a diet. Would anyone know the weight of a HMF A66 K2 crane . Early 80s model ? Ian .

Please Log in to join the conversation.

More
13 years 5 months ago #39205 by bigcam
Hi Ian, call Ross at R&R crane repairs, Darra. They are the HMF agents, and Ross and Ray have been repairing cranes for years.

Please Log in to join the conversation.

  • Swishy
  • Offline
  • If U don't like my Driving .... well then get off the footpath ...... LOL
More
13 years 5 months ago #39206 by Swishy

Eeeeen----Eeeeeen----Eeeeeen

Wotcha do n
U do relize them Crane doodadds have lotsa levers
N u got 2 handz

Oh
Never mind
Now I kno wotcha use the other appendages for

LOL

Cya

[ch9787]

OF ALL THE THINGS EYE MISS ................. EYE MISS MY MIND THE MOST

There's more WORTH in KENWORTH

Please Log in to join the conversation.

More
13 years 5 months ago - 13 years 5 months ago #39207 by Chocs
if this is even remotely useful
i have a hmf 88 model 1402 k2 the, k 2 meaning 2 hydraulic extensions.
Hyd. out and down on the legs - come out 2 mtrs
lifts app 2t @ 8.5 mtrs.
it weighs about 2500kg wet.
A similar hiab 1165 aw goes 1750 dry
is that any use?
i have found over the years...rough estimate only for older units
1t @ 5 mtrs weighs 1200 1500 kg
1 @ 8 mtrs weighs 1500 - 2000kg
that may give you a rough idea
regards
chocs 8-)

Please Log in to join the conversation.

More
13 years 5 months ago #39208 by ianoz
Thanks Guys . Tare;d it off for rego , Went 14.7 ton. Take that away from 27 gives 12.3 :o :'( . Me old leyland tipper was good for 13.3, and like the volvo would not pull the skin off a rice pudding {very fast ;D} Guys on a pommie forum asked if it was 220 or 240 HP . Feels like about 120HP perkins ponies :D ;).. Got a trip down to nanango to pick up a dozer ,after we run round here a bit and make sure theres no bugs in the system .

Swishy , Whats your mack tare and good for ??? Ian .

Please Log in to join the conversation.

More
13 years 5 months ago #39209 by ianoz
Hi Chocs , I will check your rule of thumb on the lifting CAP , See what this comes up with . Ian .

Please Log in to join the conversation.

More
13 years 5 months ago #39210 by ianoz

if this is even remotely useful
i have a hmf 88 model 1402 k2 the, k 2 meaning 2 hydraulic extensions.
Hyd. out and down on the legs - come out 2 mtrs
lifts app 2t @ 8.5 mtrs.
it weighs about 2500kg wet.
A similar hiab 1165 aw goes 1750 dry
is that any use?
i have found over the years...rough estimate only for older units
1t @ 5 mtrs weighs 1200 1500 kg
1 @ 8 mtrs weighs 1500 - 2000kg
that may give you a rough idea
regards
chocs 8-)

Hi Chocs , It says 1050 KG at 6.2 MTS 2200KG at 3MTS . Guy on an english forum reckons this model weighs 800 KGs including the legs ,which sounds a bit on the light side to Me . Humm , we have not got a buggered it i know smiley :). Ian .

Please Log in to join the conversation.

More
13 years 5 months ago #39211 by Chocs
if its old i couldnt see that!
anyway as the swish would say
idostandtobecorrected
ill go...1250 wet
regards
chocs 8-)

Please Log in to join the conversation.

Time to create page: 0.457 seconds