- Posts: 72
- Thank you received: 1
Ground Drive Header.
7 years 4 months ago #177601
by D8H
Ground Drive Header. was created by D8H
Would anyone be able to tell me the number of teeth on the spur gear and the drum cog as fitted to the early Sunshine HV McKay Header.
Thank You.
Thank You.
Please Log in to join the conversation.
7 years 4 months ago #177675
by wouldyou
Replied by wouldyou on topic Ground Drive Header.
Hello D8H,
From an old parts book in which appears to be a photo of the bits laid out flat I have counted with a magnifying glass 115 teeth on the driving gear and options of 15, 17 and 18 teeth on the driven ones, I can contact a friend who has a machine if you need an accurate count.
Curious as to what you are doing.
David.
From an old parts book in which appears to be a photo of the bits laid out flat I have counted with a magnifying glass 115 teeth on the driving gear and options of 15, 17 and 18 teeth on the driven ones, I can contact a friend who has a machine if you need an accurate count.
Curious as to what you are doing.
David.
Please Log in to join the conversation.
7 years 4 months ago #177885
by D8H
curious as to what the original drive ratio was.
Figures quoted in the article are, front Pinion Shaft 113 RPM Rear 146 RPM.
Drum Speed 830 RPM.
Thanks for your reply.
Replied by D8H on topic Ground Drive Header.
After reading an article in a October 1948 Power Farming re converting a ground drive header to PTO, I becamewouldyou wrote: Hello D8H,
Curious as to what you are doing.
David.
curious as to what the original drive ratio was.
Figures quoted in the article are, front Pinion Shaft 113 RPM Rear 146 RPM.
Drum Speed 830 RPM.
Thanks for your reply.
Please Log in to join the conversation.
Time to create page: 0.467 seconds