- Posts: 1
- Thank you received: 0
Masssy Harris 744D
1 year 2 months ago #243708
by DennisJ
Masssy Harris 744D was created by DennisJ
Having trouble trying to adjust the clutch on my 744D she runs well but clutch is slipping any advice ??
Please Log in to join the conversation.
1 year 2 months ago #243709
by wouldyou
Replied by wouldyou on topic Masssy Harris 744D
Hello Dennis,
The only adjustment would be at the linkage for free play, about 35 mm movement at the pedal before it presses the release fingers.
David.
The only adjustment would be at the linkage for free play, about 35 mm movement at the pedal before it presses the release fingers.
David.
Please Log in to join the conversation.
1 year 2 months ago #243710
by hayseed
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Replied by hayseed on topic Masssy Harris 744D
Welcome DennisJ..
I suspect (but Don't Know) It's time for a New Clutch........:S
I suspect (but Don't Know) It's time for a New Clutch........:S
"Be who you are and say what you feel...
Because those that matter...
don't mind...
And those that mind....
don't matter." -
Please Log in to join the conversation.
Less
More
- Posts: 6832
- Thank you received: 4768
1 year 2 months ago #243713
by Mrsmackpaul
This would be my first port of call and then a new clutch
Paul
Your better to die trying than live on your knees begging
Replied by Mrsmackpaul on topic Masssy Harris 744D
Hello Dennis,
The only adjustment would be at the linkage for free play, about 35 mm movement at the pedal before it presses the release fingers.
David.
This would be my first port of call and then a new clutch
Paul
Your better to die trying than live on your knees begging
Please Log in to join the conversation.
Less
More
- Posts: 257
- Thank you received: 313
1 year 2 months ago #243716
by Inter-Action
Replied by Inter-Action on topic Masssy Harris 744D
Same as the other comments. If it has been slipping, then even if you do manage to improve performance , it will probably be short
term. Best to prepare for and get required parts and info how to replace both plates, throw-out bearing and spigot bearing.
Just my thoughts. Dave.
term. Best to prepare for and get required parts and info how to replace both plates, throw-out bearing and spigot bearing.
Just my thoughts. Dave.
The following user(s) said Thank You: wee-allis
Please Log in to join the conversation.
Time to create page: 0.386 seconds