- Posts: 30
- Thank you received: 7
WTB. Atkinson bullbar and fuel tanks 1968 model
- Foden Delta
- Topic Author
- Offline
Less
More
8 years 11 months ago - 8 years 11 months ago #159447
by Foden Delta
WTB. Atkinson bullbar and fuel tanks 1968 model was created by Foden Delta
I am looking for a bullbar/ bumper as fitted to a 1968 Atkinson eight wheeler.
It is made of steel pipe and has an "A" shaped piece of pipe welded into the area in front of the radiator.
Non tilt type.
Also looking for square section tanks with steps built into side area
condition not important
Any leads most appreciated
It is made of steel pipe and has an "A" shaped piece of pipe welded into the area in front of the radiator.
Non tilt type.
Also looking for square section tanks with steps built into side area
condition not important
Any leads most appreciated
Last edit: 8 years 11 months ago by Foden Delta.
Please Log in to join the conversation.
8 years 11 months ago #159448
by Lang
Replied by Lang on topic Re: WTB. Atkinson bullbar and fuel tanks 1968 model
Please Log in to join the conversation.
- Foden Delta
- Topic Author
- Offline
Less
More
- Posts: 30
- Thank you received: 7
8 years 11 months ago #159449
by Foden Delta
Replied by Foden Delta on topic Re: WTB. Atkinson bullbar and fuel tanks 1968 model
Yes Lang
That's the one
well done in posting a pic!
That's the one
well done in posting a pic!
Please Log in to join the conversation.
Time to create page: 0.424 seconds