looking again c160

i am doing up a old hough loader and have bought a c 160 for it, unkown to me the engine has had a problem. i am told i have no chance of getting parts. i am not going to give up!. any parts any motor going or not any info on where i can get bits please.
re c160 parts,we have brought the
machine back and pulled down the engine and are in need of the
following parts or a short motor. Can you price the parts and/or the
short motor.
thanks paul melis.
engine details;
model: C160-b
Eng. no: NE-2325
sbm: ER-523
piston : 149200
cam: 121580
rings: AR-02060

we have pulled the caps out and they are running std 2005 CP FM ZF
bearings.
con rod no: 143523 PW Z 30 10-68


the parts we will need are as follows:

12 x con-rod bolts
1 x con-rod & cap
6 x pistons
6 x liners and seals
6 x ring set
6 x big end bearings (std )
1 x head gasket set

thanks for your help.

Houghy65B - Here's a previous thread that may offer you some assistance ..

www.hcvc.com.au/forum/YaBB.pl?num=1271241383/6

Hi,
I am now worried about parts for these engines. I have a set of injector sleeves, researched getting a headgasket set, apparently about $360.00. I actually drove 700ks today to go & look at an old dodge with a 160 in that started & ran ok in 3 degree heat at lunchtime. he wants $3000 fo for the old jigger, cab & chassis is U.S. I know a truck wrecker in Melbourne that supposedly has a brand new block, also has a second hand complete motor. I also have a contact for a guy who claims he has a new head that only ran on a motor for approx 100ks. He has a crank, apparently a little rusty, plus other bits. Send me a PM if any of the above may interest you.
The guy with the dodge also has a AS 160 prime mover, fitted with a Perk, Eaton 2 speed, No 2 possibly.